8581160000 WAS5 CCC 2OLP | Weidmüller Product Catalogue

WAS5 CCC 2OLP Only remaining stock availableDo not use product for new developments

General ordering data
Version	Signal converter/insulator, Input : 4-20 mA, Output : 2 x 4-20 mA, (loop powered)
Order No.	8581160000
Type	WAS5 CCC 2OLP
GTIN (EAN)	4032248234462
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	7760054122

Dimensions and weights
Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	87.5 g

Temperatures
Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55

Probability of failure
MTTF	228 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input
Input current	4...20 mA (current loop)
Number of inputs	1
Voltage drop	3.8 V

Output
Cut-off frequency (-3 dB)	30 Hz
Load impedance current	R_L = (U_B-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Number of outputs	2
Output current	2 x 4...20 mA (current loop)
Output signal limit	Approx. 31 mA

General data
Accuracy	typ. 0.1 %; max 0.2 %
Configuration	none
Galvanic isolation	Passive isolator
Rail	TS 35
Step response time	< 20 ms
Temperature coefficient	≤ 150 ppm/K
Voltage supply	min. 12 V DC/ max. 30 V DC

Insulation coordination
EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	4 kV
Insulation voltage	4 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	4 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data
Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note
Product information	This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal splitter, output-loop powered 1-channel signal splitter in 17.5 mm width, output-loop powered, for transmitting and isolating analogue DC current signals from 4 to 20 mA. Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / nominal cross-section 2.5 mm²Protection degree: IP 20 Input 4...20 mAOutput 2 x 4...20 mA Load resistance/ R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mA Transmission error Auxiliary power 4...20 mA Output current loopAmbient temperature range 0°C...+55 °C Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage 4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus Type WAS5 CCC 2OLP
Short specification	Standard signal splitter, output-loop powered 1-channel signal splitter in 17.5 mm width, output-loop powered, for transmitting and isolating analogue DC current signals from 0/4 to 20 mA.

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

General ordering data

Version	Signal converter/insulator, Input : 4-20 mA, Output : 2 x 4-20 mA, (loop powered)
Order No.	8581160000
Type	WAS5 CCC 2OLP
GTIN (EAN)	4032248234462
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	7760054122

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	87.5 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input

Input current	4...20 mA (current loop)
Number of inputs	1
Voltage drop	3.8 V

Output

Cut-off frequency (-3 dB)	30 Hz
Load impedance current	R_L = (U_B-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Number of outputs	2
Output current	2 x 4...20 mA (current loop)
Output signal limit	Approx. 31 mA

General data

Accuracy	typ. 0.1 %; max 0.2 %
Configuration	none
Galvanic isolation	Passive isolator
Rail	TS 35
Step response time	< 20 ms
Temperature coefficient	≤ 150 ppm/K
Voltage supply	min. 12 V DC/ max. 30 V DC

Insulation coordination

EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	4 kV
Insulation voltage	4 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	4 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Standard signal splitter, output-loop powered
1-channel signal splitter in 17.5 mm width, output-loop powered,
for transmitting and isolating analogue DC current signals from 4 to 20 mA.
Add-on housing for TS35 DIN rail installation
Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm
Screw connection / nominal cross-section 2.5 mm²Protection degree: IP 20 Input                         4...20 mAOutput                       2 x 4...20 mA
Load resistance/ R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mA
Transmission error       Auxiliary power                   4...20 mA Output current loopAmbient temperature range 0°C...+55 °C

Isolation                                EN 50178 , 2-way isolation up to 4 kV AC/DC
Test voltage                               4 kV
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus

Type                                                            WAS5 CCC 2OLP

Short specification

Standard signal splitter, output-loop powered
1-channel signal splitter in 17.5 mm width, output-loop powered, for transmitting and isolating analogue DC current signals from 0/4 to 20 mA.

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

Related products

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view

Related products: