1351430000 VPU I 2+0 R PV 1000V DC | Weidmüller Product Catalogue

VPU I 2+0 R PV 1000V DC

General ordering data
Version	Surge voltage arrester, Low voltage, with remote contact
Order No.	1351430000
Type	VPU I 2+0 R PV 1000V DC
GTIN (EAN)	4050118158663
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	2530620000

Dimensions and weights
Depth	69 mm
Depth (inches)	2.717 inch
Height	106 mm
Height (inches)	4.173 inch
Width	71.2 mm
Width (inches)	2.803 inch
Mounting dimension - height	75 mm
Net weight	786 g

Temperatures
Storage temperature	-40 °C...80 °C

Connection data, remote alert
Connection type	PUSH IN
Cross-section for connected wire, solid core, max.	1.5 mm²
Cross-section for connected wire, solid core, min.	0.14 mm²
Stripping length	8 mm

General data
Colour	black
Design	Installation housing; 4TE, Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
UL 94 flammability rating	V-0
Version	with remote contact

Insulation coordination acc. to EN 50178
Pollution severity	2
Surge voltage category	IV

Photovoltaic technical data
Discharge current I_n (8/20 µs)	20 kA
Discharge current, max. (8/20 µs)	40 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1,000 V
PV system voltage, max. U_cpv	1,000 V
Protection level U_p (+/-)	≤ 5.2 kV
Protection level U_p (+/PE)	≤ 2.6 kV
Protection level U_p (-/PE)	≤ 2.6 kV
Requirements class	Type I/II
Short-circuit curent I_SCPV	200 A
Standards	EN 50539-11
Total discharge current I_total ( 8/20µs)	40 kA

Rated data IEC / EN
Discharge current I_n (8/20µs) wire-PE	40 kA
Discharge current, max. (8/20 µs)	40 kA
Leakage current at U_n	100 µA
Lightning test current I_imp(10/350 µs) (L-PE)	12.5 kA
Max. continuous voltage, Uc (DC)	1000 V
Number of poles	4
PV voltage, acc. to IEC 60364-7-712	≤ 1000 V
Rated voltage (DC)	1000 V
Requirements category acc. to IEC 61643-11	Type I/II
Requirements class, acc. to EN 61643-11	T1, T2
Response time	≤ 25 ns
SPD type	T1, T2
Signalling contact	250 V 1A 1CO, 125 V AC / 1 A, 48 V CC / 0.5 A, 24 V DC / 0,5 A
Standards	EN 50539-11
Voltage type	DC

Connection data
Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Downloads
Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Beipackzettel / Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Tender specification sheets
Long specification	Multi-pole surge voltage arrestor according to the requirements of Class I acc. to IEC 50539-11. Consisting of V0 material, the arrestor provides overvoltage protection in applications acc. to IEC 50539-12 in unearthed PV systems. The WEMID V0 arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (CO contact). Rated voltage: 1000 VDC Iimp: 12.5 kA In/max (8/20 µs): 20/40 kA protection level < 2.6 kV telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU I 2+0 R PV 1000 V Order No. 13514300000 or equivalent
Short specification	Class I arrester with Iimp: 12.5 kA suitable for PV systems. Protection level < 2.6 kV. With remote alert Type: Weidmüller VPU I 2+0 R PV 1000 V/12.5 kA Order no. 1351430000 or equivalent

Approvals
Approvals
ROHS	Conform

Related products:

	Type of connection: Screw connection Order No.: 2530620000 Type: VPU PV I+II 3 R 1000	Version: Surge voltage arrester, Low voltage, Surge protection I / II, with remote contact
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2530190000 Type: VPU PV I+II 3 R 1000 E	Version: Surge voltage arrester, Low voltage, Surge protection I / II, with remote contact
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2856490000 Type: VPU PV I+II 5 R 1000
		PDF data sheet Add to Inquiry List

General ordering data

Version	Surge voltage arrester, Low voltage, with remote contact
Order No.	1351430000
Type	VPU I 2+0 R PV 1000V DC
GTIN (EAN)	4050118158663
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	2530620000

Dimensions and weights

Depth	69 mm
Depth (inches)	2.717 inch
Height	106 mm
Height (inches)	4.173 inch
Width	71.2 mm
Width (inches)	2.803 inch
Mounting dimension - height	75 mm
Net weight	786 g

Connection data, remote alert

Connection type	PUSH IN
Cross-section for connected wire, solid core, max.	1.5 mm²
Cross-section for connected wire, solid core, min.	0.14 mm²
Stripping length	8 mm

General data

Colour	black
Design	Installation housing; 4TE, Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
UL 94 flammability rating	V-0
Version	with remote contact

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	IV

Photovoltaic technical data

Discharge current I_n (8/20 µs)	20 kA
Discharge current, max. (8/20 µs)	40 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1,000 V
PV system voltage, max. U_cpv	1,000 V
Protection level U_p (+/-)	≤ 5.2 kV
Protection level U_p (+/PE)	≤ 2.6 kV
Protection level U_p (-/PE)	≤ 2.6 kV
Requirements class	Type I/II
Short-circuit curent I_SCPV	200 A
Standards	EN 50539-11
Total discharge current I_total ( 8/20µs)	40 kA

Rated data IEC / EN

Discharge current I_n (8/20µs) wire-PE	40 kA
Discharge current, max. (8/20 µs)	40 kA
Leakage current at U_n	100 µA
Lightning test current I_imp(10/350 µs) (L-PE)	12.5 kA
Max. continuous voltage, Uc (DC)	1000 V
Number of poles	4
PV voltage, acc. to IEC 60364-7-712	≤ 1000 V
Rated voltage (DC)	1000 V
Requirements category acc. to IEC 61643-11	Type I/II
Requirements class, acc. to EN 61643-11	T1, T2
Response time	≤ 25 ns
SPD type	T1, T2
Signalling contact	250 V 1A 1CO, 125 V AC / 1 A, 48 V CC / 0.5 A, 24 V DC / 0,5 A
Standards	EN 50539-11
Voltage type	DC

Connection data

Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Downloads

Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Beipackzettel / Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Multi-pole surge voltage arrestor according to the requirements of Class I acc. to IEC 50539-11. Consisting of V0 material, the arrestor provides overvoltage protection in applications acc. to IEC 50539-12 in unearthed PV systems. The WEMID V0 arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (CO contact). Rated voltage: 1000 VDC Iimp: 12.5 kA In/max (8/20 µs): 20/40 kA protection level < 2.6 kV telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU I 2+0 R PV 1000 V Order No. 13514300000 or equivalent

Short specification

Class I arrester with Iimp: 12.5 kA suitable for PV systems. Protection level < 2.6 kV. With remote alert Type: Weidmüller VPU I 2+0 R PV 1000 V/12.5 kA Order no. 1351430000 or equivalent

Approvals

Approvals
ROHS	Conform

Related products

	Type of connection: Screw connection Order No.: 2530620000 Type: VPU PV I+II 3 R 1000	Version: Surge voltage arrester, Low voltage, Surge protection I / II, with remote contact
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2530190000 Type: VPU PV I+II 3 R 1000 E	Version: Surge voltage arrester, Low voltage, Surge protection I / II, with remote contact
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2856490000 Type: VPU PV I+II 5 R 1000
		PDF data sheet Add to Inquiry List

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view