1351270000 VPU II 3 PV 1000V DC | Weidmüller Product Catalogue

VPU II 3 PV 1000V DC

General ordering data
Version	Surge voltage arrester, Low voltage, without telecomm. contact
Order No.	1351270000
Type	VPU II 3 PV 1000V DC
GTIN (EAN)	4050118158793
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2022-03-30
Alternative product	2530550000

Dimensions and weights
Depth	69 mm
Depth (inches)	2.717 inch
Height	94 mm
Height (inches)	3.701 inch
Width	53.4 mm
Width (inches)	2.102 inch
Mounting dimension - height	75 mm
Net weight	400 g

Temperatures
Storage temperature	-40 °C...80 °C
Operating temperature	-40 °C...70

General data
Colour	black, orange
Design	Installation housing; 3TE, Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
UL 94 flammability rating	V-0
Version	without telecomm. contact

Insulation coordination acc. to EN 50178
Pollution severity	2
Surge voltage category	III

Photovoltaic technical data
Discharge current I_n (8/20 µs)	20 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1,000 V
PV system voltage, max. U_cpv	1,000 V
Protection level U_p (+/- , -/PE , +/PE)	≤ 4.0 kV
Requirements class	Type II
Short-circuit curent I_SCPV	200 A
Standards	EN 50539-11

Rated data IEC / EN
Discharge current I_max (8/20µs) wire-PE	40 kA
Discharge current I_n (8/20µs) wire-PE	20 kA
Leakage current at U_n	100 µA
Max. continuous voltage, Uc (DC)	1000 V
Number of poles	3
PV voltage, acc. to IEC 60364-7-712	≤ 1000 V
Rated voltage (DC)	1000 V
Response time	≤ 25 ns
SPD type	T2
Signalling contact	No
Standards	EN 50539-11
Voltage type	DC

Connection data
Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	2.5 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Downloads
Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Beipackzettel / Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Tender specification sheets
Long specification	Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection in applications acc. to IEC 50539-12 in unearthed PV systems. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. Rated voltage: 1000 VDC In/max (8/20 µs): 20/40 kA, protection level < 4 kV, type: Weidmüller VPU II 3 PV 1000 V/40 kA, Order No. 1351270000 or equivalent
Short specification	Class II arrestor with In/Imax: 20/40 kA suitable for unearthed PV systems. Protection level < 4 kV. Type: Weidmüller VPU II 3 PV 1000 V/40 kA Order No. 1351270000 or equivalent

Approvals
Approvals
ROHS	Conform

Related products:

	Type of connection: Screw connection Order No.: 2530550000 Type: VPU PV II 3 1000	Version: Surge voltage arrester, Low voltage
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2856500000 Type: VPU PV II 5 1000
		PDF data sheet Add to Inquiry List

General ordering data

Version	Surge voltage arrester, Low voltage, without telecomm. contact
Order No.	1351270000
Type	VPU II 3 PV 1000V DC
GTIN (EAN)	4050118158793
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2022-03-30
Alternative product	2530550000

Dimensions and weights

Depth	69 mm
Depth (inches)	2.717 inch
Height	94 mm
Height (inches)	3.701 inch
Width	53.4 mm
Width (inches)	2.102 inch
Mounting dimension - height	75 mm
Net weight	400 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-40 °C...70

General data

Colour	black, orange
Design	Installation housing; 3TE, Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
UL 94 flammability rating	V-0
Version	without telecomm. contact

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	III

Photovoltaic technical data

Discharge current I_n (8/20 µs)	20 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	1,000 V
PV system voltage, max. U_cpv	1,000 V
Protection level U_p (+/- , -/PE , +/PE)	≤ 4.0 kV
Requirements class	Type II
Short-circuit curent I_SCPV	200 A
Standards	EN 50539-11

Rated data IEC / EN

Discharge current I_max (8/20µs) wire-PE	40 kA
Discharge current I_n (8/20µs) wire-PE	20 kA
Leakage current at U_n	100 µA
Max. continuous voltage, Uc (DC)	1000 V
Number of poles	3
PV voltage, acc. to IEC 60364-7-712	≤ 1000 V
Rated voltage (DC)	1000 V
Response time	≤ 25 ns
SPD type	T2
Signalling contact	No
Standards	EN 50539-11
Voltage type	DC

Connection data

Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	2.5 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	2.5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	2.5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	2.5 mm²
Connection cross-section, stranded, max.	50 mm²

Downloads

Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Beipackzettel / Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection in applications acc. to IEC 50539-12 in unearthed PV systems. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. Rated voltage: 1000 VDC In/max (8/20 µs): 20/40 kA, protection level < 4 kV, type: Weidmüller VPU II 3 PV 1000 V/40 kA, Order No. 1351270000 or equivalent

Short specification

Class II arrestor with In/Imax: 20/40 kA suitable for unearthed PV systems. Protection level < 4 kV. Type: Weidmüller VPU II 3 PV 1000 V/40 kA Order No. 1351270000 or equivalent

Approvals

Approvals
ROHS	Conform

Related products

	Type of connection: Screw connection Order No.: 2530550000 Type: VPU PV II 3 1000	Version: Surge voltage arrester, Low voltage
		PDF data sheet Add to Inquiry List

	Type of connection: Screw connection Order No.: 2856500000 Type: VPU PV II 5 1000
		PDF data sheet Add to Inquiry List

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view