Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Tools
Automatic Machines
Software
Markers
Industrial printers
Industry Light
Cabinet Infrastructure
Cable Ducts
Cable ties
Thermal Management
Phase distribution bars
DIN rails
Mounting rail support
TS 15
TS 20
TS 27
TS 32
TS 35
Steel
Aluminum
General ordering data
Version
Terminal rail, with slot, Accessories, 15 x 5.5 x 2000 mm, Slit width: 4.20 mm, Slit length: 12.20 mm, Steel, galvanic zinc plated and passivated
Order No.
0117500000
Type
TS 15X5/LL 2M/ST/ZN
GTIN (EAN)
4008190150662
Qty.
2 m
Dimensions and weights
Depth
5.5 mm
Depth (inches)
0.217 inch
Height
15 mm
Height (inches)
0.591 inch
Width
2,000 mm
Width (inches)
78.74 inch
Net weight
140 g
Mounting rail
Drill-hole diameter
4.2 mm
Length of the terminal rail
nominal
2,000 mm
max.
2,000 mm
min.
0 mm
Material
Steel
Pre-punched mounting rail
Yes
Short circuit strength corresponds to E-Cu wire
10 mm²
Short-time withstand current per second according to IEC 60947-7-2
1.2 kA
Slit gap
8 mm
Slit length
12.2 mm
Slit width
4.2 mm
Slotted drill holes
Yes
Solder eyelet hole diameter (D)
4.2 mm
Spacing of holes, centre-to-centre
20 mm
Standards
DIN EN 60715
Surface finish
galvanic zinc plated and passivated
Thickness
1 mm
Classifications
ETIM 6.0
EC001285
ETIM 7.0
EC001285
ETIM 8.0
EC001285
ETIM 9.0
EC001285
ECLASS 9.0
27-40-06-02
ECLASS 9.1
27-40-06-02
ECLASS 10.0
27-40-06-02
ECLASS 11.0
27-40-06-02
ECLASS 12.0
27-40-06-02
ECLASS 13.0
27-40-06-02
Order No.:
0514200000
Type:
TS 15X5 2M/ST/ZN
Version:
Terminal rail, without slot, Accessories, 15 x 5.5 x 2000 mm, Steel, galvanic zinc plated and passivated
Order No.:
0117510000
Type:
TS 15X5/LL 1M/ST/ZN
Version:
Terminal rail, with slot, Accessories, 15 x 5.5 x 1000 mm, Slit width: 4.20 mm, Slit length: 12.00 mm, Steel, galvanic zinc plated and passivated
Version
Terminal rail, with slot, Accessories, 15 x 5.5 x 2000 mm, Slit width: 4.20 mm, Slit length: 12.20 mm, Steel, galvanic zinc plated and passivated
Order No.
0117500000
Type
TS 15X5/LL 2M/ST/ZN
GTIN (EAN)
4008190150662
Qty.
2 m
Depth
5.5 mm
Depth (inches)
0.217 inch
Height
15 mm
Height (inches)
0.591 inch
Width
2,000 mm
Width (inches)
78.74 inch
Net weight
140 g
Drill-hole diameter
4.2 mm
Length of the terminal rail
nominal
2,000 mm
max.
2,000 mm
min.
0 mm
Material
Steel
Pre-punched mounting rail
Yes
Short circuit strength corresponds to E-Cu wire
10 mm²
Short-time withstand current per second according to IEC 60947-7-2
1.2 kA
Slit gap
8 mm
Slit length
12.2 mm
Slit width
4.2 mm
Slotted drill holes
Yes
Solder eyelet hole diameter (D)
4.2 mm
Spacing of holes, centre-to-centre
20 mm
Standards
DIN EN 60715
Surface finish
galvanic zinc plated and passivated
Thickness
1 mm
ETIM 6.0
EC001285
ETIM 7.0
EC001285
ETIM 8.0
EC001285
ETIM 9.0
EC001285
ECLASS 9.0
27-40-06-02
ECLASS 9.1
27-40-06-02
ECLASS 10.0
27-40-06-02
ECLASS 11.0
27-40-06-02
ECLASS 12.0
27-40-06-02
ECLASS 13.0
27-40-06-02
Order No.:
0514200000
Type:
TS 15X5 2M/ST/ZN
Version:
Terminal rail, without slot, Accessories, 15 x 5.5 x 2000 mm, Steel, galvanic zinc plated and passivated
Order No.:
0117510000
Type:
TS 15X5/LL 1M/ST/ZN
Version:
Terminal rail, with slot, Accessories, 15 x 5.5 x 1000 mm, Slit width: 4.20 mm, Slit length: 12.00 mm, Steel, galvanic zinc plated and passivated
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.