Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
PLC Interfaces and Migration Solutions
Cord sets, Patchcords and Cables
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2-tier
10 mm²
16 mm²
1 1/4"x1/4" fuse
5x20 fuse
5x25 fuse
5x30 fuse
E 14 fuse
General ordering data
Version
SAK Series, Fuse terminal, Rated cross-section: 10 mm², Screw connection, Wemid, dark beige, Direct mounting
Order No.
9509620000
Type
KSKM 3/35 GZ 1 1/4X1/4
GTIN (EAN)
4008190456818
Qty.
20 pc(s).
Dimensions and weights
Depth
63.2 mm
Depth (inches)
2.488 inch
Height
69 mm
Height (inches)
2.717 inch
Width
13 mm
Width (inches)
0.512 inch
Net weight
44.7 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Material data
Material
Wemid
Insulating material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
System specifications
Version
Screw connection, Fuse isolator, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
Additional technical data
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
1.0 x 5.5 mm
Clamping range, max.
16 mm²
Clamping range, min.
0.33 mm²
Clamping screw
M 4
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
12 mm
Tightening torque, max.
2.4 Nm
Tightening torque, min.
1.2 Nm
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Display element
Type of voltage for indicator
AC/DC
Fuse terminals
Cartridge fuse
G-Si. 6.3 x 32
Display
Without LED
Fuse holder (cartridge holder)
pluggable
Operating voltage, max.
440 V
Type of voltage for indicator
AC/DC
General
Installation advice
Direct mounting
Rail
TS 35
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Rating data
Rated cross-section
10 mm²
Rated voltage
440 V
Rated DC voltage
440 V
Rated current
10 A
Current at maximum wires
10 A
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Power loss in accordance with IEC 60947-7-x
1.82 W
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
600 V
Important note
Product information
The voltage depends on the selected fuse element or the selected indicator light
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
Order No.:
0667520000
Type:
SAKS 3/35 GZ/6.3X32
Version:
Fuse terminal, Screw connection, Fuse cartridge, One end without connector, Screw connection, 10 mm², 500 V, 10 A, G-Si. 6.3 x 32, medium yellow
Version
SAK Series, Fuse terminal, Rated cross-section: 10 mm², Screw connection, Wemid, dark beige, Direct mounting
Order No.
9509620000
Type
KSKM 3/35 GZ 1 1/4X1/4
GTIN (EAN)
4008190456818
Qty.
20 pc(s).
Depth
63.2 mm
Depth (inches)
2.488 inch
Height
69 mm
Height (inches)
2.717 inch
Width
13 mm
Width (inches)
0.512 inch
Net weight
44.7 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Material
Wemid
Insulating material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Version
Screw connection, Fuse isolator, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Connection type, additional connection
Screw connection
Blade size
1.0 x 5.5 mm
Clamping range, max.
16 mm²
Clamping range, min.
0.33 mm²
Clamping screw
M 4
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
12 mm
Tightening torque, max.
2.4 Nm
Tightening torque, min.
1.2 Nm
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Type of voltage for indicator
AC/DC
Cartridge fuse
G-Si. 6.3 x 32
Display
Without LED
Fuse holder (cartridge holder)
pluggable
Operating voltage, max.
440 V
Type of voltage for indicator
AC/DC
Installation advice
Direct mounting
Rail
TS 35
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Rated cross-section
10 mm²
Rated voltage
440 V
Rated DC voltage
440 V
Rated current
10 A
Current at maximum wires
10 A
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Power loss in accordance with IEC 60947-7-x
1.82 W
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
600 V
Product information
The voltage depends on the selected fuse element or the selected indicator light
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
0667520000
Type:
SAKS 3/35 GZ/6.3X32
Version:
Fuse terminal, Screw connection, Fuse cartridge, One end without connector, Screw connection, 10 mm², 500 V, 10 A, G-Si. 6.3 x 32, medium yellow
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}