Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
DK-SERIES
General ordering data
Version
DK-SERIES, Relay module, Number of contacts: 1, CO contact AgSnO2, Rated control voltage: 24 V UC ±20 %, Continuous current: 6 A, Screw connection, Test button available: No
Order No.
9454910000
Type
DKR DK5 24VUC 1U
GTIN (EAN)
4032248181827
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2019-04-15
Alternative product
1122780000
Dimensions and weights
Depth
77 mm
Depth (inches)
3.031 inch
Height
77 mm
Height (inches)
3.031 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
25 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-40 °C...60
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
Control side
Rated control voltage
24 V UC ±20 %
Rated current AC
9 mA
Rated current DC
7 mA
Power rating
220 mVA/ 180 mW
Status indicator
Green LED
Protective circuit
Free-wheeling diode
Load side
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
6 A
AC switching capacity (resistive), max.
1500 VA
DC switching capacity (resistive), max.
140 W
Switch-on delay
6 ms
Switch-off delay
15 ms AC / 8 ms DC
Contact type
1 CO contact (AgSnO2)
Mechanical service life
'2 x 107 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V
General data
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Open sides
right
Colour
beige
Insulation coordination
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength to mounting rail
4 kVeff
Impulse withstand voltage
4 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section AWG, max.
AWG 12
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
DK-SERIES, Relay module, Number of contacts: 1, CO contact AgSnO2, Rated control voltage: 24 V UC ±20 %, Continuous current: 6 A, Screw connection, Test button available: No
Order No.
9454910000
Type
DKR DK5 24VUC 1U
GTIN (EAN)
4032248181827
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2019-04-15
Alternative product
1122780000
Depth
77 mm
Depth (inches)
3.031 inch
Height
77 mm
Height (inches)
3.031 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
25 g
Storage temperature
-40 °C...60 °C
Operating temperature
-40 °C...60
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1
Rated control voltage
24 V UC ±20 %
Rated current AC
9 mA
Rated current DC
7 mA
Power rating
220 mVA/ 180 mW
Status indicator
Green LED
Protective circuit
Free-wheeling diode
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
6 A
AC switching capacity (resistive), max.
1500 VA
DC switching capacity (resistive), max.
140 W
Switch-on delay
6 ms
Switch-off delay
15 ms AC / 8 ms DC
Contact type
1 CO contact (AgSnO2)
Mechanical service life
'2 x 107 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Open sides
right
Colour
beige
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength to mounting rail
4 kVeff
Impulse withstand voltage
4 kV
Protection degree
IP20
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section AWG, max.
AWG 12
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.