Limit-value monitoring of DC currents up to 2.5 A with switching output limit-value monitoring component for measuring DC currents 0.5... 2.5 A with switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.
Pluggable unit on base, for mounting on TS35 DIN rail Dimensions: L/W/H 92/ 15.3/ 95 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20
Input 0.5...2.5 A DC / Reed relay coil Switch-on threshold < 500 mA Switch-off threshold < 50 mA Output 1 NO / Reed contact Switching current max 100 mA AC/DC Switching voltage 100 V AC / 50 V DC Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kVeff / 1 min. input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type PAS CMR 0.5...2.5 A DC
Short specification
Limit-value monitoring of DC currents up to 2.5 A with switching output limit-value monitoring component for measuring DC currents 0.5... 2.5 A with switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.
Limit-value monitoring of DC currents up to 2.5 A with switching output limit-value monitoring component for measuring DC currents 0.5... 2.5 A with switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.
Pluggable unit on base, for mounting on TS35 DIN rail Dimensions: L/W/H 92/ 15.3/ 95 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20
Input 0.5...2.5 A DC / Reed relay coil Switch-on threshold < 500 mA Switch-off threshold < 50 mA Output 1 NO / Reed contact Switching current max 100 mA AC/DC Switching voltage 100 V AC / 50 V DC Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kVeff / 1 min. input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type PAS CMR 0.5...2.5 A DC
Short specification
Limit-value monitoring of DC currents up to 2.5 A with switching output limit-value monitoring component for measuring DC currents 0.5... 2.5 A with switching output. The monitoring unit is designed so that it can be plugged onto the mounting base.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.