8721150000 MAS RPS | Weidmüller Product Catalogue

MAS RPS Only remaining stock availableDo not use product for new developments

General ordering data
Version	MICROSERIES, Supply isolator
Order No.	8721150000
Type	MAS RPS
GTIN (EAN)	4032248394418
Qty.	1 pc(s).

Dimensions and weights
Height	97.8 mm
Height (inches)	3.85 inch
Width	6.1 mm
Width (inches)	0.24 inch
Length	88 mm
Length (inches)	3.465 inch
Net weight	48 g

Temperatures
Storage temperature	-25 °C...85 °C
Operating temperature	0 °C...55 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure
SIL in compliance with IEC 61508	None
MTTF	450 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	4c08c934-ef45-4df2-8269-ccadfff1d702

Input
Input current	4...20 mA
Number of inputs	1
Sensor	2-wire
Sensor supply	16.5 V / constant for 3 – 22 mA

Output
Load impedance current	≤ 500 Ω
Number of outputs	1
Offset current	<30 µA
Output current	4...20 mA
Output signal limit	22...25 mA

General data
Accuracy	<0,1 %
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	ca. 1 W
Rail	TS 35
Step response time	≤ 2 ms
Temperature coefficient	≤ 50 ppm/K
Voltage supply	24 V DC ± 15 %

Insulation coordination
EMC standards	DIN EN 61326 Class B
Galvanic isolation	3-way isolator
Insulation voltage	1.5 kV_eff
Pollution severity	2
Rated voltage	300 V
Surge voltage category	II

Connection data
Type of connection	Screw connection
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal supply isolator 1-channel supply isolator in 6.1 mm width with external power supply and sensor supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA Add-on housing for TS35 rail mounting Dimensions: L/W/H 88/ 6.1/ 97.8 mm Screw connection / Nominal cross-section 1.5 mm²Protection degree: IP 20 Input 4...20 mA Output 4...20 mA 0...10 V 2-wire Sensor supply 16.5 V/ const. at 3...22 mA Load resistance Current / voltage < 500 Ohm> 10 kOhm Transmission error < 0,1 % v. E. Step response time (10...90 %) < 2 ms Auxiliary power 24 VDC +/- 15 % Power loss approx. 1 W Ambient temperature range 0°C...+55 °C Isolation EN 50178, 3-way isolation up to 2.5 kV AC/DC of all circuits against each other Test voltage 1.5 kV input against output against auxiliary power Rated voltage 600 V AC/DC at overvoltage category II and pollution degree 2 Approvals cULus, cULusEX, ATEX Zone2 Type MAS RPS
Short specification	Standard signal supply isolator 1-channel supply isolator in 6.1 mm width with external power supply and sensor supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate No. (cURus)	E175400
Certificate no. (cULus)	E337701

General ordering data

Version	MICROSERIES, Supply isolator
Order No.	8721150000
Type	MAS RPS
GTIN (EAN)	4032248394418
Qty.	1 pc(s).

Dimensions and weights

Height	97.8 mm
Height (inches)	3.85 inch
Width	6.1 mm
Width (inches)	0.24 inch
Length	88 mm
Length (inches)	3.465 inch
Net weight	48 g

Temperatures

Storage temperature	-25 °C...85 °C
Operating temperature	0 °C...55 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure

SIL in compliance with IEC 61508	None
MTTF	450 a

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	4c08c934-ef45-4df2-8269-ccadfff1d702

Input

Input current	4...20 mA
Number of inputs	1
Sensor	2-wire
Sensor supply	16.5 V / constant for 3 – 22 mA

Output

Load impedance current	≤ 500 Ω
Number of outputs	1
Offset current	<30 µA
Output current	4...20 mA
Output signal limit	22...25 mA

General data

Accuracy	<0,1 %
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	ca. 1 W
Rail	TS 35
Step response time	≤ 2 ms
Temperature coefficient	≤ 50 ppm/K
Voltage supply	24 V DC ± 15 %

Insulation coordination

EMC standards	DIN EN 61326 Class B
Galvanic isolation	3-way isolator
Insulation voltage	1.5 kV_eff
Pollution severity	2
Rated voltage	300 V
Surge voltage category	II

Connection data

Type of connection	Screw connection
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Standard signal supply isolator
1-channel supply isolator in 6.1 mm width with external power supply
and sensor supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 88/ 6.1/ 97.8 mm
Screw connection / Nominal cross-section 1.5 mm²Protection degree: IP 20
Input                         4...20 mA
Output                                             4...20 mA
                                      0...10 V
2-wire
Sensor supply 16.5 V/ const. at 3...22 mA
Load resistance
Current / voltage          < 500 Ohm> 10 kOhm
Transmission error              < 0,1 % v. E.
Step response time
(10...90 %)                    < 2 ms
Auxiliary power                                     24 VDC +/- 15 %
Power loss approx. 1 W
Ambient
temperature range 0°C...+55 °C

Isolation                                 EN 50178, 3-way isolation up to 2.5 kV AC/DC of all circuits against each other
Test voltage                               1.5 kV input against output against auxiliary power
Rated
voltage                                          600 V AC/DC at overvoltage category II and pollution degree 2
Approvals cULus, cULusEX, ATEX Zone2

Type MAS RPS

Short specification

Standard signal supply isolator
1-channel supply isolator in 6.1 mm width with external power supply
and sensor supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate No. (cURus)	E175400
Certificate no. (cULus)	E337701

Related products

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view

Related products: