Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
BT-SERIES
General ordering data
Version
BT-SERIES, Multifunction timing relay, with separate control input, , Number of contacts: 1, CO contact, AgNi 90/10, Rated control voltage: 24...230 V AC, 24...48 V DC, Continuous current: 5 A, Screw connection
Order No.
8647700000
Type
TIMER BTM-S
GTIN (EAN)
4032248308903
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2021-12-31
Alternative product
2697250000
Dimensions and weights
Depth
74 mm
Depth (inches)
2.913 inch
Height
80 mm
Height (inches)
3.15 inch
Width
17.5 mm
Width (inches)
0.689 inch
Net weight
76.2 g
Temperatures
Storage temperature
-25 °C...65 °C
Operating temperature
-10 °C...55
Humidity
35...85 % rel. humidity, no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
Rated data UL
Certificate No. (cURus)
E223474
Control side
Rated control voltage
24...230 V AC, 24...48 V DC
Power rating
≤ 0.4 VA, 1.6 W
Status indicator
LED green: supply voltage, LED orange: relay output on
Time ranges
0.1 s - 1.2 s, 1 s - 12 s, 0.1 min - 1.2 min, 1 min - 12 min, 0.1 h - 1.2 h, 1 h - 12 h, 10 h - 120 h
Setting tolerance
10 %
Max. reset time after voltage interruption
100 ms
Min. pulse duration
50 ms
Repeat accuracy
± 1 %
Load side
Rated switching voltage
250 V AC
Continuous current
5 A
Max. switching voltage, AC
250 V
AC switching capacity (resistive), max.
2500 VA
DC switching capacity (resistive), max.
120 W @ 24 V
Contact type
1 CO contact (AgNi 90/10)
Electrical service life, DC coil
105 switching cycles (5A at 250 Vac, ohm load at 1800/h)
Mechanical service life
107 swtiching cycles (no load, 1800/h)
General data
Version
with separate control input
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
beige
UL 94 flammability rating
V-2
Insulation coordination
Dielectric strength, Input/Output
2 kVeff / 1 min
Protection degree
IP20
Further details of approvals / standards
Standards
UL508
Certificate No. (CSA)
219713
Certificate No. (cURus)
E223474
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, max.
0.98 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section AWG, max.
AWG 14
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Blade size
size PH1
Classifications
ETIM 6.0
EC001439
ETIM 7.0
EC001439
ETIM 8.0
EC001439
ETIM 9.0
EC001439
ECLASS 9.0
27-37-16-05
ECLASS 9.1
27-37-16-05
ECLASS 10.0
27-37-16-05
ECLASS 11.0
27-37-16-05
ECLASS 12.0
27-37-16-05
ECLASS 13.0
27-37-16-05
Version
BT-SERIES, Multifunction timing relay, with separate control input, , Number of contacts: 1, CO contact, AgNi 90/10, Rated control voltage: 24...230 V AC, 24...48 V DC, Continuous current: 5 A, Screw connection
Order No.
8647700000
Type
TIMER BTM-S
GTIN (EAN)
4032248308903
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2021-12-31
Alternative product
2697250000
Depth
74 mm
Depth (inches)
2.913 inch
Height
80 mm
Height (inches)
3.15 inch
Width
17.5 mm
Width (inches)
0.689 inch
Net weight
76.2 g
Storage temperature
-25 °C...65 °C
Operating temperature
-10 °C...55
Humidity
35...85 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1
Certificate No. (cURus)
E223474
Rated control voltage
24...230 V AC, 24...48 V DC
Power rating
≤ 0.4 VA, 1.6 W
Status indicator
LED green: supply voltage, LED orange: relay output on
Time ranges
0.1 s - 1.2 s, 1 s - 12 s, 0.1 min - 1.2 min, 1 min - 12 min, 0.1 h - 1.2 h, 1 h - 12 h, 10 h - 120 h
Setting tolerance
10 %
Max. reset time after voltage interruption
100 ms
Min. pulse duration
50 ms
Repeat accuracy
± 1 %
Rated switching voltage
250 V AC
Continuous current
5 A
Max. switching voltage, AC
250 V
AC switching capacity (resistive), max.
2500 VA
DC switching capacity (resistive), max.
120 W @ 24 V
Contact type
1 CO contact (AgNi 90/10)
Electrical service life, DC coil
105 switching cycles (5A at 250 Vac, ohm load at 1800/h)
Mechanical service life
107 swtiching cycles (no load, 1800/h)
Version
with separate control input
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
beige
UL 94 flammability rating
V-2
Dielectric strength, Input/Output
2 kVeff / 1 min
Protection degree
IP20
Standards
UL508
Certificate No. (CSA)
219713
Certificate No. (cURus)
E223474
Wire connection method
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, max.
0.98 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section AWG, max.
AWG 14
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Blade size
size PH1
ETIM 6.0
EC001439
ETIM 7.0
EC001439
ETIM 8.0
EC001439
ETIM 9.0
EC001439
ECLASS 9.0
27-37-16-05
ECLASS 9.1
27-37-16-05
ECLASS 10.0
27-37-16-05
ECLASS 11.0
27-37-16-05
ECLASS 12.0
27-37-16-05
ECLASS 13.0
27-37-16-05
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E223474
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
