Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Signal - & serial interface converter– WAVESERIES
Process monitoring displays
Analogue-digital / digital-analogue converter
Configuration software
Accessories
Universal signal converter
Current measuring transducer
Frequency signal converter
Limit- & current monitoring
Serial interface converter
Temperature transducer
Signal converter
Rectifier modules
Resistance module
WAS5 PRO RTD CU
Do not use product for new developmentsOnly remaining stock available
General ordering data
Version
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, CU, Output : 0(4)-20 mA, 0-10 V
Order No.
8638950000
Type
WAS5 PRO RTD CU
GTIN (EAN)
4032248309917
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2022-12-31
Alternative product
2448100000
Dimensions and weights
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
103.5 g
Temperatures
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
Probability of failure
MTTF
267 a
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
Input
Line resistance in measuring circuit
5 Ω Cu 10; 15 Ω Cu 25; 25 Ω Cu 50; 50 Ω Cu 100
Number of inputs
1
Sensor
Cu 10, Cu 25, Cu 50, Cu 100
Temperature input range
Adjustable from -200...+260°C
Output
Fine adjustment
± 12.5% of FSR
Load impedance current
≤ 600 Ω
Number of outputs
1
Offset current
max. 100 µA
Offset voltage
max. 0.05 V
Output current
0...20 mA, 4...20 mA
Output voltage, note
0...10 V
Wire break detection
LED flashing (output value: > 20 mA, >10 V)
load impedance voltage
≥ 1 kΩ
Output (digital)
Status indicator
Module active: LED on/ wire breakage: LED flashing/Error: LED off
Output (analogue)
Output current
0...20 mA, 4...20 mA
General data
Accuracy
Slow/fast step response time: 0.5% of measuring range or 0.5 K/ 1% of measuring range or 1 K
Configuration
DIP switch
Galvanic isolation
3-way isolator
Linearity
Yes
Power consumption
880...980...1030 mW at IOUT = 20 mA
Rail
TS 35
Step response time
Fast: 1.2 s/ slow: 2.2 s
Temperature coefficient
Voltage supply
24 V DC ± 20 %
Insulation coordination
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Connection data
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Important note
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
Classifications
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
Tender specification sheets
Long specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side. Internal potentiometer is used for zero and span calibrations. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20 Input3-/4-wire Cu 10, Cu 25, Cu 50, Cu 100 Output 0/4...20 mA 0...10 V Load resistance < 600 Ohm/ Strom/> 1 kOhm/ voltage Transmission error < 0,8% v. E. (RTD) typ. 200 ppm / °C Auxiliary power 24 VDC +/- 25 % Power loss approx. 0.9 W Ambient temperature range 0°C...+55 °C Isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage2 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEX
Type WAS5 PRO RTD Cu
Short specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side. Internal potentiometer is used for zero and span calibrations.
Type of connection:
Screw connection
Order No.:
8560700000
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432220000
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432190000
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432160000
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432130000
Type:
WTZ4 PT100/3 V 0-10V
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432280000
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432250000
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
8560720000
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
Version
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, CU, Output : 0(4)-20 mA, 0-10 V
Order No.
8638950000
Type
WAS5 PRO RTD CU
GTIN (EAN)
4032248309917
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2022-12-31
Alternative product
2448100000
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
103.5 g
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
Line resistance in measuring circuit
5 Ω Cu 10; 15 Ω Cu 25; 25 Ω Cu 50; 50 Ω Cu 100
Number of inputs
1
Sensor
Cu 10, Cu 25, Cu 50, Cu 100
Temperature input range
Adjustable from -200...+260°C
Fine adjustment
± 12.5% of FSR
Load impedance current
≤ 600 Ω
Number of outputs
1
Offset current
max. 100 µA
Offset voltage
max. 0.05 V
Output current
0...20 mA, 4...20 mA
Output voltage, note
0...10 V
Wire break detection
LED flashing (output value: > 20 mA, >10 V)
load impedance voltage
≥ 1 kΩ
Status indicator
Module active: LED on/ wire breakage: LED flashing/Error: LED off
Output current
0...20 mA, 4...20 mA
Accuracy
Slow/fast step response time: 0.5% of measuring range or 0.5 K/ 1% of measuring range or 1 K
Configuration
DIP switch
Galvanic isolation
3-way isolator
Linearity
Yes
Power consumption
880...980...1030 mW at IOUT = 20 mA
Rail
TS 35
Step response time
Fast: 1.2 s/ slow: 2.2 s
Temperature coefficient
Voltage supply
24 V DC ± 20 %
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
Long specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side. Internal potentiometer is used for zero and span calibrations. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20 Input3-/4-wire Cu 10, Cu 25, Cu 50, Cu 100 Output 0/4...20 mA 0...10 V Load resistance < 600 Ohm/ Strom/> 1 kOhm/ voltage Transmission error < 0,8% v. E. (RTD) typ. 200 ppm / °C Auxiliary power 24 VDC +/- 25 % Power loss approx. 0.9 W Ambient temperature range 0°C...+55 °C Isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage2 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEX
Type WAS5 PRO RTD Cu
Short specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side. Internal potentiometer is used for zero and span calibrations.
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Certificate no. (cULusEX)
E223527
Type of connection:
Screw connection
Order No.:
8560700000
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432220000
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432190000
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432160000
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432130000
Type:
WTZ4 PT100/3 V 0-10V
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432280000
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432250000
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
8560720000
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.