Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Switched-mode power supply units
Electronic load monitoring
Communication modules
Uninterruptible power supply
Unregulated power supplies
DC/DC converter
Diode- and redundancy modules
Pre charge unit
Decentralised switched-mode power supply units IP65
Decentralised electronic load monitoring IP65
Accessories
Compact Power single-phase
General ordering data
Version
Power supply, unregulated, 24 V
Order No.
8575310000
Type
CP NT 264W 24V 11A
GTIN (EAN)
4032248226412
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2017-08-30
Dimensions and weights
Depth
113 mm
Depth (inches)
4.449 inch
Height
165 mm
Height (inches)
6.496 inch
Width
120 mm
Width (inches)
4.724 inch
Net weight
6,157.3 g
Temperatures
Storage temperature
-20 °C...80 °C
Operating temperature
-20 °C...55
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
Input
Clamping range, input
2.5 mm²
Clamping range, input, max.
2.5 mm²
Clamping range, input, min.
0.13 mm²
Connection range
2.5 mm²
Connection system
Screw connection
Ext. Back-up fuse
3.15 A / 1.6 A time-lag
Input current
1.8 A/ 1 A
Input frequency
50/ 60 Hz
Input voltage (voltage mode input)
230 V/ 400 V ±15 V
No-load input current
0.5 A / 0.28 A
Wire connection method
Screw connection
Output
Clamping range, output
2.5 mm²
Clamping range, output, max.
4 mm²
Clamping range, output, min.
0.5 mm²
Connection range
2.5 mm²
Fuse
Thermostatic switch
Max. residual ripple
< 5 %
Output current at 40 °C
11 A
Output current at 55 °C
10 A
Output power
264 W
Output voltage type
DC
Output voltage, note
SELV
Protective circuit, load side
Varistor
Wire connection method
Screw connection
General data
Building Width
120 mm
Building height
165 mm
Degree of efficiency at max. load
93%
Depth
113 mm
EMC standards
EN 61000-6 /-2, -3
Installation advice
Direct mounting
Low Voltage Directive
72/ 23/ EWG
Mounting position, installation notice
Arbitrary
Protection degree
IP20
Short-circuit protection
Yes
Standards
DIN EN 60950, DIN EN 61558-2-4, -6, 72/23/EWG
Status indication
Green LED
Insulation coordination
Insulation class
B
Insulation strength
4 kV
Protection class
I
Touch-safe protection
acc. to BGV A3
Connection data (input)
Connection system
Screw connection
Signalling
Status indication
Green LED
Classifications
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.0
27-04-07-01
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-07-01
Approvals
Approvals
ROHS
Conform
Version
Power supply, unregulated, 24 V
Order No.
8575310000
Type
CP NT 264W 24V 11A
GTIN (EAN)
4032248226412
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2017-08-30
Depth
113 mm
Depth (inches)
4.449 inch
Height
165 mm
Height (inches)
6.496 inch
Width
120 mm
Width (inches)
4.724 inch
Net weight
6,157.3 g
Storage temperature
-20 °C...80 °C
Operating temperature
-20 °C...55
REACH SVHC
Lead 7439-92-1
Clamping range, input
2.5 mm²
Clamping range, input, max.
2.5 mm²
Clamping range, input, min.
0.13 mm²
Connection range
2.5 mm²
Connection system
Screw connection
Ext. Back-up fuse
3.15 A / 1.6 A time-lag
Input current
1.8 A/ 1 A
Input frequency
50/ 60 Hz
Input voltage (voltage mode input)
230 V/ 400 V ±15 V
No-load input current
0.5 A / 0.28 A
Wire connection method
Screw connection
Clamping range, output
2.5 mm²
Clamping range, output, max.
4 mm²
Clamping range, output, min.
0.5 mm²
Connection range
2.5 mm²
Fuse
Thermostatic switch
Max. residual ripple
< 5 %
Output current at 40 °C
11 A
Output current at 55 °C
10 A
Output power
264 W
Output voltage type
DC
Output voltage, note
SELV
Protective circuit, load side
Varistor
Wire connection method
Screw connection
Building Width
120 mm
Building height
165 mm
Degree of efficiency at max. load
93%
Depth
113 mm
EMC standards
EN 61000-6 /-2, -3
Installation advice
Direct mounting
Low Voltage Directive
72/ 23/ EWG
Mounting position, installation notice
Arbitrary
Protection degree
IP20
Short-circuit protection
Yes
Standards
DIN EN 60950, DIN EN 61558-2-4, -6, 72/23/EWG
Status indication
Green LED
Insulation class
B
Insulation strength
4 kV
Protection class
I
Touch-safe protection
acc. to BGV A3
Connection system
Screw connection
Status indication
Green LED
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.0
27-04-07-01
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-07-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.