8447160000 WAS5 CCC HF 0-20/0-20MA | Weidmüller Product Catalogue

WAS5 CCC HF 0-20/0-20MA Product is no longer availableData sheet for information only

General ordering data
Version	Signal converter/insulator, Input : 0(4)-20 mA, Output : 0(4)-20 mA
Order No.	8447160000
Type	WAS5 CCC HF 0-20/0-20MA
GTIN (EAN)	4032248100620
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	1481970000

Dimensions and weights
Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	101.2 g

Temperatures
Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55

Probability of failure
MTTF	266 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input
Input current	0...20 mA, 4…20mA
Input resistance, current	50 Ω
Number of inputs	1

Output
Cut-off frequency (-3 dB)	≥ 15 kHz (typ. 20 kHz)
Load impedance current	≤ 500 Ω
Number of outputs	1
Output current	0...20 mA, 4...20 mA

General data
Accuracy	< 0.2 % of end value
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	< 1.5 W @ I_OUT = 20 mA
Rail	TS 35
Step response time	≤ 40 µs (typ. 30 µs)
Temperature coefficient	≤ 250 ppm/K of final value
Voltage supply	24 V DC ± 25 %

Insulation coordination
EMC standards	EN 55011, EN 61000-6
Galvanic isolation	3-way isolator
Impulse withstand voltage	4 kV
Insulation voltage	1.2 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	1.2 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data
Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note
Product information	This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width with external power supply, for transmitting and isolating analogue DC current signals 0(4)...20 mA. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm²Protection degree: IP 20 Input 0(4)...20 mA Output 0(4)...20 mA Transmission error < 0,2% v. E. Limit frequency 20 kHz Auxiliary power 24 VDC +/- 25 % Power loss approx. 1.3 W Ambient temperature range 0 °C...+55 °C Secure isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage 4 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, CSA Type WAS5 CCC HF 0-20/0-20MA
Short specification	Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width with external power supply, for transmitting and isolating analogue DC current signals from 0/4 to 20 mA

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

General ordering data

Version	Signal converter/insulator, Input : 0(4)-20 mA, Output : 0(4)-20 mA
Order No.	8447160000
Type	WAS5 CCC HF 0-20/0-20MA
GTIN (EAN)	4032248100620
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	1481970000

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	101.2 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input

Input current	0...20 mA, 4…20mA
Input resistance, current	50 Ω
Number of inputs	1

Output

Cut-off frequency (-3 dB)	≥ 15 kHz (typ. 20 kHz)
Load impedance current	≤ 500 Ω
Number of outputs	1
Output current	0...20 mA, 4...20 mA

General data

Accuracy	< 0.2 % of end value
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	< 1.5 W @ I_OUT = 20 mA
Rail	TS 35
Step response time	≤ 40 µs (typ. 30 µs)
Temperature coefficient	≤ 250 ppm/K of final value
Voltage supply	24 V DC ± 25 %

Insulation coordination

EMC standards	EN 55011, EN 61000-6
Galvanic isolation	3-way isolator
Impulse withstand voltage	4 kV
Insulation voltage	1.2 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	1.2 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Standard signal isolating converter
1-channel signal isolating converter in 17.5 mm width with external power supply,
for transmitting and isolating analogue DC current signals 0(4)...20 mA.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm
Screw connection / Nominal cross-section 2.5 mm²Protection degree: IP 20

Input                         0(4)...20 mA
Output                                             0(4)...20 mA
Transmission error             < 0,2% v. E.
Limit frequency 20 kHz
Auxiliary power                                     24 VDC +/- 25 %
Power loss approx. 1.3 W
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other
Test voltage                               4 kV input against output against auxiliary power
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus, CSA

Type WAS5 CCC HF 0-20/0-20MA

Short specification

Standard signal isolating converter
1-channel signal isolating converter in 17.5 mm width with external power supply,
for transmitting and isolating analogue DC current signals from 0/4 to 20 mA

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

Related products

	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view

Related products: