Standard signal isolating converter, 2-way isolation 1-channel signal isolating converter in 12.5 mm width with output-side power supply for transmitting and isolating analogue 4...20 mA DC current signals. The input circuit is powered by the current loop. 0...10 V are available on the output side.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20
Input 4...20 mA / current-loop powered Output 0...10 V Apparent resistance at output > 1 kOhm Transmission error< 0,2% v. E. Limit frequency 15 Hz Auxiliary power 24 VDC +/- 20 % Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 2-way isolation up to 4 kV AC/DC Test voltage 4 kV input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULusEX, cULus, CSA
Type WAZ4 CCC DC 4-20/0-10V
Short specification
Standard signal isolating converter, 2-way isolation 1-channel signal isolating converter in 12.5 mm width with output-side power supply for transmitting and isolating analogue 4...20 mA DC current signals. The input circuit is powered by the current loop. 0...10 V are available on the output side.
Standard signal isolating converter, 2-way isolation 1-channel signal isolating converter in 12.5 mm width with output-side power supply for transmitting and isolating analogue 4...20 mA DC current signals. The input circuit is powered by the current loop. 0...10 V are available on the output side.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20
Input 4...20 mA / current-loop powered Output 0...10 V Apparent resistance at output > 1 kOhm Transmission error< 0,2% v. E. Limit frequency 15 Hz Auxiliary power 24 VDC +/- 20 % Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 2-way isolation up to 4 kV AC/DC Test voltage 4 kV input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULusEX, cULus, CSA
Type WAZ4 CCC DC 4-20/0-10V
Short specification
Standard signal isolating converter, 2-way isolation 1-channel signal isolating converter in 12.5 mm width with output-side power supply for transmitting and isolating analogue 4...20 mA DC current signals. The input circuit is powered by the current loop. 0...10 V are available on the output side.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.