8444950000 WAS5 CCC LP 0-20/0-20MA | Weidmüller Product Catalogue

WAS5 CCC LP 0-20/0-20MA Only remaining stock availableDo not use product for new developments

General ordering data
Version	Passive isolator, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA
Order No.	8444950000
Type	WAS5 CCC LP 0-20/0-20MA
GTIN (EAN)	4032248102099
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	7760054123

Dimensions and weights
Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	125 g

Temperatures
Storage temperature	-40 °C...80 °C
Operating temperature	-25 °C...70

Probability of failure
MTTF	2,097 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input
Input current	0(4)...20 mA current loop
Number of inputs	1
Pick-up current	< 100 µA
Voltage drop	Approx. 3 V at R_L = 0 Ω; approx. 13 V at R_L = 500 Ω; (I_IN =20 mA)

Output
Load impedance current	≤ 500 Ω
Number of outputs	1
Output current	0...20 mA, 4...20 mA

General data
Accuracy	< 0.1 % of end value
Configuration	none
Galvanic isolation	Passive isolator
Rail	TS 35
Temperature coefficient	≤ 50 ppm/K of final value
Voltage supply	via the input measuring circuit

Insulation coordination
EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	6 kV
Insulation voltage	4 kV_eff / 1 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data
Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note
Product information	This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal passive isolator, input-loop powered 1channel passive isolator in 17.5 mm with, input-loop powered, for transmitting and isolating DC current signals 0/4...20 mA Add-on housing for TS35 DIN rail installation Dimensions: L/B/H 92.4/ 17.5/ 112.4 mm Screw connection/ Nominal cross-section 2.5 mm²Protection degree: IP 20 Input 0/4...20 mA Output 0/4...20 mA Voltage drop approx. 3 V at R_L 0 Ohm, 13 V at R_L= 500 Ohm (20 mA) Load resistance < 500 Ohm Transmission error < 0,1 % v. E. Auxiliary power 0/4...20 mA input current loop Ambient temperature range -25 °C...+70 °C Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage 6 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEX, CSA, GL Type WAS5 CCC-LP 0-20/0-20mA
Short specification	Standard signal passive isolator, input-loop powered 1-channel signal passive isolator in 17.5 mm width with input current loop feed, for transmitting and isolating analogue DC current signals from 0/4 to 20 mA

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197
Certificate no. (cULusEX)	E223527

General ordering data

Version	Passive isolator, Input : 0(4)-20 mA, (loop powered), Output : 0(4)-20 mA
Order No.	8444950000
Type	WAS5 CCC LP 0-20/0-20MA
GTIN (EAN)	4032248102099
Qty.	1 pc(s).
Delivery status	Discontinued
Available until	2022-03-30
Alternative product	7760054123

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	125 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-25 °C...70

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input

Input current	0(4)...20 mA current loop
Number of inputs	1
Pick-up current	< 100 µA
Voltage drop	Approx. 3 V at R_L = 0 Ω; approx. 13 V at R_L = 500 Ω; (I_IN =20 mA)

Output

Load impedance current	≤ 500 Ω
Number of outputs	1
Output current	0...20 mA, 4...20 mA

General data

Accuracy	< 0.1 % of end value
Configuration	none
Galvanic isolation	Passive isolator
Rail	TS 35
Temperature coefficient	≤ 50 ppm/K of final value
Voltage supply	via the input measuring circuit

Insulation coordination

EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	6 kV
Insulation voltage	4 kV_eff / 1 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Screw connection
Stripping length, rated connection	7 mm
Tightening torque, min.	0.4 Nm
Tightening torque, max.	0.5 Nm
Clamping range, rated connection	2.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Standard signal passive isolator, input-loop powered
1channel passive isolator in 17.5 mm with, input-loop powered,
for transmitting and isolating DC current signals 0/4...20 mA

Add-on housing for TS35 DIN rail installation
Dimensions: L/B/H 92.4/ 17.5/ 112.4 mm
Screw connection/ Nominal cross-section 2.5 mm²Protection degree: IP 20

Input                         0/4...20 mA
Output                                             0/4...20 mA
Voltage drop approx. 3 V at R_L 0 Ohm, 13 V at R_L= 500 Ohm (20 mA)
Load resistance             < 500 Ohm
Transmission error             < 0,1 % v. E.
Auxiliary power                                     0/4...20 mA input current loop
Ambient
temperature range -25 °C...+70 °C

Isolation                                EN 50178 , 2-way isolation up to 4 kV AC/DC
Test voltage                               6 kV
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus, cULusEX, CSA, GL

Type WAS5 CCC-LP 0-20/0-20mA

Short specification

Standard signal passive isolator, input-loop powered
1-channel signal passive isolator in 17.5 mm width with input current loop feed,
for transmitting and isolating analogue DC current signals from 0/4 to 20 mA

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197
Certificate no. (cULusEX)	E223527

Related products

	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view

Related products: