Trip amplifier for monitoring a 0...10 V standard signal with two switching outputs
Trip amplifier in 6 mm width for analogue 0...10 V standard signals with two PNP-transistor switch outputs
for monitoring an upper and lower threshold (adjustable via potentiometer).
DIP switches can be used to select a range of 300 mV to 10 V, 30 mV to 1 V, and 10 mV to 100 mV on the input side.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 91/ 6/ 63.2 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²
Protection degree: IP 20 

Input                             0...10 V 
                                          ranges 300 mV...10 V / 30 mV...1 V / 10 mV...100 mV
Output                                                 Double switching output PNP/ 50 mA per channel
                                          adjustable via potentiometer
Switching hysteresis 1 % of input
Step response time           < 250 us (10...90 %)
Temperature coefficient       < 250 ppm K
Auxiliary power                                         24 V DC +/- 20 %
Ambient
temperature range 0°C...+50 °C

Isolation                                    1.5 kV
Approvals cURus, CSA

Type                                                                MCZ SC 0-10V

Trip amplifier for monitoring a 0...10 V standard signal with two switching outputs
Trip amplifier in 6 mm width for analogue 0...10 V standard signals with two PNP-transistor switch outputs
for monitoring an upper and lower threshold (adjustable via potentiometer).
DIP switches can be used to select a range of 300 mV to 10 V, 30 mV to 1 V, and 10 mV to 100 mV on the input side.