Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
EG-SERIES
General ordering data
Version
EG-Series, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 24 V DC +15 % / -10 %, Continuous current: 5 A, Screw connection, Test button available: No
Order No.
8216520000
Type
EGR EG7 24VDC 1A
GTIN (EAN)
4008190190439
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2012-12-31
Alternative product
1122770000
Dimensions and weights
Depth
92 mm
Depth (inches)
3.622 inch
Height
44.5 mm
Height (inches)
1.752 inch
Width
10 mm
Width (inches)
0.394 inch
Net weight
44.31 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...60
Control side
Rated control voltage
24 V DC +15 % / -10 %
Power rating
280 mW +20 % -10 %
Status indicator
Green LED
Load side
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching current
8 A
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
1250 VA
DC switching capacity (resistive), max.
120 W @ 24 V
Switch-on delay
≤ 8 ms
Switch-off delay
≤ 6 ms
Min. switching current
10 mA
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 2x105 (24Vdc, 1.1A, inductive load) switching cycles
Mechanical service life
> 15 x 106 switching cycles
Min. switching power
10 mA @ 10 V
General data
Rail
TS 15, TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
beige
Insulation coordination
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 8 mm
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength for control side - load side
8 kV
Dielectric strength, Input/Output
4 kVeff
Impulse withstand voltage
8 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
EG-Series, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 24 V DC +15 % / -10 %, Continuous current: 5 A, Screw connection, Test button available: No
Order No.
8216520000
Type
EGR EG7 24VDC 1A
GTIN (EAN)
4008190190439
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2012-12-31
Alternative product
1122770000
Depth
92 mm
Depth (inches)
3.622 inch
Height
44.5 mm
Height (inches)
1.752 inch
Width
10 mm
Width (inches)
0.394 inch
Net weight
44.31 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...60
Rated control voltage
24 V DC +15 % / -10 %
Power rating
280 mW +20 % -10 %
Status indicator
Green LED
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching current
8 A
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
1250 VA
DC switching capacity (resistive), max.
120 W @ 24 V
Switch-on delay
≤ 8 ms
Switch-off delay
≤ 6 ms
Min. switching current
10 mA
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 2x105 (24Vdc, 1.1A, inductive load) switching cycles
Mechanical service life
> 15 x 106 switching cycles
Min. switching power
10 mA @ 10 V
Rail
TS 15, TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
beige
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 8 mm
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength for control side - load side
8 kV
Dielectric strength, Input/Output
4 kVeff
Impulse withstand voltage
8 kV
Protection degree
IP20
Wire connection method
Screw connection
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Blade size
0.6 x 3.5 mm
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
