Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Terminal blocks with other connection method
1-tier
2-tier
4 mm²
5x20 fuse
General ordering data
Version
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 24 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.
8146450000
Type
KDKS1/EN LD 24VDC
GTIN (EAN)
4008190171902
Qty.
25 pc(s).
Dimensions and weights
Depth
55.5 mm
Depth (inches)
2.185 inch
Height
62.75 mm
Height (inches)
2.47 inch
Width
8 mm
Width (inches)
0.315 inch
Net weight
17.96 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
c6099607-b1cd-4fc8-8f5b-8c2defa73093
Material data
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
System specifications
Version
Screw connection, Fuse cartridge, with LED, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35, TS 32
N-function
No
PE function
No
PEN function
No
Additional technical data
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 3
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
3
Stripping length
9 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.5 Nm
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Dimensions
TS 32 offset
31 mm
TS 35 offset
31 mm
Display element
Current
2 mA
Operating voltage for display, min.
24 V
Type of voltage for indicator
DC
Fuse terminals
Cartridge fuse
G-Si. 5 x 20
Current
2 mA
Display
LED
Fuse holder (cartridge holder)
Pivoting
Operating voltage, max.
24 V
Type of voltage for indicator
DC
General
Installation advice
Direct mounting
Rail
TS 35, TS 32
Wire connection cross section AWG, max.
AWG 12
Rating data
Rated cross-section
4 mm²
Rated voltage
24 V
Rated DC voltage
24 V
Rated current
6.3 A
Current at maximum wires
6.3 A
Volume resistance according to IEC 60947-7-x
1 mΩ
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Important note
Product information
The voltage depends on the selected fuse element or the selected indicator light
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
Approvals
Approvals
ROHS
Conform
Order No.:
8148910000
Type:
KDKS1/EN LD 230VAC
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 230 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.:
8148930000
Type:
KDKS1/EN LD 24 VAC
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 24 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.:
9802730000
Type:
KDKS1LD/24 GFH DDECK FUSE TERM
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, 4 mm², 500 V
Version
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 24 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.
8146450000
Type
KDKS1/EN LD 24VDC
GTIN (EAN)
4008190171902
Qty.
25 pc(s).
Depth
55.5 mm
Depth (inches)
2.185 inch
Height
62.75 mm
Height (inches)
2.47 inch
Width
8 mm
Width (inches)
0.315 inch
Net weight
17.96 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
REACH SVHC
Lead 7439-92-1
SCIP
c6099607-b1cd-4fc8-8f5b-8c2defa73093
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Version
Screw connection, Fuse cartridge, with LED, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35, TS 32
N-function
No
PE function
No
PEN function
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Connection type, additional connection
Screw connection
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 3
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
3
Stripping length
9 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.5 Nm
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
TS 32 offset
31 mm
TS 35 offset
31 mm
Current
2 mA
Operating voltage for display, min.
24 V
Type of voltage for indicator
DC
Cartridge fuse
G-Si. 5 x 20
Current
2 mA
Display
LED
Fuse holder (cartridge holder)
Pivoting
Operating voltage, max.
24 V
Type of voltage for indicator
DC
Installation advice
Direct mounting
Rail
TS 35, TS 32
Wire connection cross section AWG, max.
AWG 12
Rated cross-section
4 mm²
Rated voltage
24 V
Rated DC voltage
24 V
Rated current
6.3 A
Current at maximum wires
6.3 A
Volume resistance according to IEC 60947-7-x
1 mΩ
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Product information
The voltage depends on the selected fuse element or the selected indicator light
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
Approvals
ROHS
Conform
Order No.:
8148910000
Type:
KDKS1/EN LD 230VAC
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 230 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.:
8148930000
Type:
KDKS1/EN LD 24 VAC
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, Screw connection, 4 mm², 24 V, 6.3 A, G-Si. 5 x 20, beige / yellow
Order No.:
9802730000
Type:
KDKS1LD/24 GFH DDECK FUSE TERM
Version:
Fuse terminal, Screw connection, Fuse cartridge, with LED, One end without connector, 4 mm², 500 V
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}
;){kind=link}