Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Potential equalisation terminal block
Shield clamping saddle
Accessories
Earth-wire disconnect terminal blocks
Feed-through terminal blocks for functional earth
Protective earth terminal block for functional earth
Please select ...
General ordering data
Version
Feed-through terminal block, Screw connection, 2.5 mm², 800 V, 24 A, Number of connections: 2
Order No.
2429520000
Type
WDU 2.5 GE/SW
GTIN (EAN)
4050118439076
Qty.
100 pc(s).
Dimensions and weights
Depth
46.5 mm
Depth (inches)
1.831 inch
Height
60 mm
Height (inches)
2.362 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
7.51 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material data
Material
Wemid
Colour
black/yellow
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Screw connection, for plug-in cross-connector, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
Yes
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.5 mm²
max.
2.5 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Clamping range, max.
4 mm²
Clamping range, min.
0.05 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 30
Rating data
Rated cross-section
2.5 mm²
Rated voltage
800 V
Rated DC voltage
800 V
Rated current
24 A
Current at maximum wires
32 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
2000090000
Type:
WDU 35N GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 500 V, 125 A, Number of connections: 2
Order No.:
2000080000
Type:
WDU 50N GE/SW
Version:
Feed-through terminal block, Screw connection, 50 mm², 1000 V, 150 A, Number of connections: 2
Order No.:
2000100000
Type:
WDU 70N/35 GE/SW
Version:
Feed-through terminal block, Screw connection, 70 mm², 1000 V, 192 A, Number of connections: 2
Order No.:
2000040000
Type:
WDU 16 GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 1000 V, 76 A, Number of connections: 2
Order No.:
2000050000
Type:
WDU 16N GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 690 V, 76 A, Number of connections: 2
Order No.:
2000060000
Type:
WDU 35 GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 1000 V, 125 A, Number of connections: 2
Order No.:
1020190000
Type:
WDU 4 GE/SW
Version:
Feed-through terminal block, Screw connection, 4 mm², 800 V, 32 A, Number of connections: 2
Order No.:
2000110000
Type:
WDU 95N/120N GE/SW
Version:
Feed-through terminal block, Screw connection, 120 mm², 1000 V, 269 A, Number of connections: 2
Version
Feed-through terminal block, Screw connection, 2.5 mm², 800 V, 24 A, Number of connections: 2
Order No.
2429520000
Type
WDU 2.5 GE/SW
GTIN (EAN)
4050118439076
Qty.
100 pc(s).
Depth
46.5 mm
Depth (inches)
1.831 inch
Height
60 mm
Height (inches)
2.362 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
7.51 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material
Wemid
Colour
black/yellow
UL 94 flammability rating
V-0
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Screw connection, for plug-in cross-connector, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Explosion-tested version
Yes
Open sides
right
Type of mounting
Snap-on
Connection type, additional connection
Screw connection
Blade size
0.6 x 3.5 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.5 mm²
max.
2.5 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Clamping range, max.
4 mm²
Clamping range, min.
0.05 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 30
Rated cross-section
2.5 mm²
Rated voltage
800 V
Rated DC voltage
800 V
Rated current
24 A
Current at maximum wires
32 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
2000090000
Type:
WDU 35N GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 500 V, 125 A, Number of connections: 2
Order No.:
2000080000
Type:
WDU 50N GE/SW
Version:
Feed-through terminal block, Screw connection, 50 mm², 1000 V, 150 A, Number of connections: 2
Order No.:
2000100000
Type:
WDU 70N/35 GE/SW
Version:
Feed-through terminal block, Screw connection, 70 mm², 1000 V, 192 A, Number of connections: 2
Order No.:
2000040000
Type:
WDU 16 GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 1000 V, 76 A, Number of connections: 2
Order No.:
2000050000
Type:
WDU 16N GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 690 V, 76 A, Number of connections: 2
Order No.:
2000060000
Type:
WDU 35 GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 1000 V, 125 A, Number of connections: 2
Order No.:
1020190000
Type:
WDU 4 GE/SW
Version:
Feed-through terminal block, Screw connection, 4 mm², 800 V, 32 A, Number of connections: 2
Order No.:
2000110000
Type:
WDU 95N/120N GE/SW
Version:
Feed-through terminal block, Screw connection, 120 mm², 1000 V, 269 A, Number of connections: 2
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}