Power Solid-State Relais, Solid state contactor, Rated control voltage: 3.5…32 V DC , Rated switching voltage: 24…600 V AC, Continuous current: 52 A (AC51) at 40 °C, mounted on heatsink with 0.75 K/W, Screw connection
Order No.
1406240000
Type
PSSR 24VDC/1PH AC50A HP
GTIN (EAN)
4050118206746
Qty.
2 pc(s).
Delivery status
Discontinued
Available until
2022-09-30
Dimensions and weights
Depth
29 mm
Depth (inches)
1.142 inch
Height
58.5 mm
Height (inches)
2.303 inch
Width
45 mm
Width (inches)
1.772 inch
Net weight
87 g
Temperatures
Storage temperature
-55 °C...125 °C
Operating temperature
-55 °C...100 °C
Humidity
40...85 % (indoor) no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
68d07448-41d4-40df-bc1f-f0c4ff99974f
Rated data UL
Certificate No. (cURus)
E360862
Control side
Rated control voltage
3.5…32 V DC
Nominal control current
13.4 mA DC ±20 %
Power rating
≤ 280 mW
Status indicator
Green LED
Protective circuit
Suppressor diode
Input frequency
10 Hz
Load side
Rated switching voltage
24…600 V AC
Continuous current
52 A (AC 51) @ 40 °C @ mounted on heatsink with 0.75 K/W
Max. switching current
60 A
Load category
AC 51
Inrush current
400 A (10 ms)
Pulse load, max. current
700 A (10 ms), non-recurrent
Load limit integral (I²t) <10 ms
2,450 A²s
Switch-on delay
≤ 10 ms
Switch-off delay
≤ 10 ms
Voltage drop at max. load
≤1.35 V
Leakage current
≤ 1 mA
Min. switching current
5 mA
Short-circuit-proof
No
Protective circuit, load side
Varistor
Contact type
1 NO contact (Thyristor (zero-cross switch))
Output voltage frequency range
50 / 60 Hz
max. switching frequency (DC control voltage)
10 Hz
General data
Version
Single-phase without heat sink (zero-voltage switch output)
Colour
black
Insulation coordination
Pollution severity
2
Surge voltage category
III
Dielectric strength for control side - load side
4 kVeff
Dialectric strength of load side - housing
4 kVeff
Impulse withstand voltage
4 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Certificate No. (cURus)
E360862
Connection data (control side)
Wire connection method (control side)
Screw connection
Nom. rated connection clamping range (control side)
1.5 mm²
Min. rated connection clamping range (control side)
0.75 mm²
Max. rated connection clamping range (control side)
Power Solid-State Relais, Solid state contactor, Rated control voltage: 3.5…32 V DC , Rated switching voltage: 24…600 V AC, Continuous current: 52 A (AC51) at 40 °C, mounted on heatsink with 0.75 K/W, Screw connection
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
 at 40 °C, mounted on heatsink with 0.75 K/W, Screw connection',1,'2.0',1,'14062400009999.jpg',false,0);)
