Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
Special loads
Sensor isolation
Signal adaption
High switching frequencies
Timing functions
Functional safety
Power
Power solid-state relays
Electromechanical relays
PSSR single phase
PSSR 3-phase
with heat sink
Complete modules
Current-monitoring modules
General ordering data
Order No.
1406230000
Type
PSSR 1PH CONTROL UNIT
GTIN (EAN)
4050118206739
Qty.
1 pc(s).
Dimensions and weights
Depth
65 mm
Depth (inches)
2.559 inch
Height
112.3 mm
Height (inches)
4.421 inch
Width
25 mm
Width (inches)
0.984 inch
Net weight
85 g
Temperatures
Storage temperature
-40 °C...125 °C
Operating temperature
-40 °C...80 °C
Humidity
40...85 % (indoor) no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
Supply
Voltage supply
8…30 V DC
Current consumption
≤ 20 mA (feedback output unloaded), ≤ 120 mA (switched feedback output max. loaded)
Protective circuit
Varistor, Reverse polarity protection
Control side
Rated control voltage (control input)
4…30 V DC
Nominal control current (control input)
≤ 2.5 mA
Rated control voltage (external teach input)
4…30 V DC
Nominal control current (external teach input)
≤ 2.5 mA
Input frequency
10 Hz
Control output to the PSSR
Solid-state type
Transistor
Nominal switching voltage
8...30 V DC
Switch-on delay
≤ 15 ms
Switch-off delay
≤ 16 ms
Feedback output
Solid-state type
MOS-FET
Nominal switching voltage
8...30 V DC
Continuous current
0.1 A
Switch-on delay
≤ 100 ms
Switch-off delay
≤ 100 ms
Current monitoring
Undercurrent switching threshold
0.84 x Isetting
Leakage current in PSSR output, max.
0.3 A
Current transformer
Current measurement range AC, max.
40 A
Current measurement range AC, min.
2 A
Current sensor hole diameter
9 mm
General data
Colour
black
Insulation coordination
Pollution severity
2
Surge voltage category
III
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.15 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26
Wire cross-section, finely stranded, max. (AWG)
AWG 12
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.2 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Classifications
ETIM 6.0
EC001440
ETIM 7.0
EC001440
ETIM 8.0
EC001440
ETIM 9.0
EC001440
ECLASS 9.0
27-37-18-02
ECLASS 9.1
27-37-18-02
ECLASS 10.0
27-37-18-02
ECLASS 11.0
27-37-18-02
ECLASS 12.0
27-37-18-02
ECLASS 13.0
27-37-18-02
Approvals
Approvals
ROHS
Conform
There are no products in this group.
Order No.
1406230000
Type
PSSR 1PH CONTROL UNIT
GTIN (EAN)
4050118206739
Qty.
1 pc(s).
Depth
65 mm
Depth (inches)
2.559 inch
Height
112.3 mm
Height (inches)
4.421 inch
Width
25 mm
Width (inches)
0.984 inch
Net weight
85 g
Storage temperature
-40 °C...125 °C
Operating temperature
-40 °C...80 °C
Humidity
40...85 % (indoor) no condensation
REACH SVHC
Lead 7439-92-1
Voltage supply
8…30 V DC
Current consumption
≤ 20 mA (feedback output unloaded), ≤ 120 mA (switched feedback output max. loaded)
Protective circuit
Varistor, Reverse polarity protection
Rated control voltage (control input)
4…30 V DC
Nominal control current (control input)
≤ 2.5 mA
Rated control voltage (external teach input)
4…30 V DC
Nominal control current (external teach input)
≤ 2.5 mA
Input frequency
10 Hz
Solid-state type
Transistor
Nominal switching voltage
8...30 V DC
Switch-on delay
≤ 15 ms
Switch-off delay
≤ 16 ms
Solid-state type
MOS-FET
Nominal switching voltage
8...30 V DC
Continuous current
0.1 A
Switch-on delay
≤ 100 ms
Switch-off delay
≤ 100 ms
Undercurrent switching threshold
0.84 x Isetting
Leakage current in PSSR output, max.
0.3 A
Current measurement range AC, max.
40 A
Current measurement range AC, min.
2 A
Current sensor hole diameter
9 mm
Pollution severity
2
Surge voltage category
III
Protection degree
IP20
Wire connection method
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.15 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26
Wire cross-section, finely stranded, max. (AWG)
AWG 12
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.2 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
ETIM 6.0
EC001440
ETIM 7.0
EC001440
ETIM 8.0
EC001440
ETIM 9.0
EC001440
ECLASS 9.0
27-37-18-02
ECLASS 9.1
27-37-18-02
ECLASS 10.0
27-37-18-02
ECLASS 11.0
27-37-18-02
ECLASS 12.0
27-37-18-02
ECLASS 13.0
27-37-18-02
Approvals
ROHS
Conform
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
