Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
Standard
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Pluggable terminal blocks
Modular terminal blocks with electronic components
terminal blocks with spring-loaded cable clamp
terminal blocks with miscellaneous connection
1-tier
2-tier
1.5 mm²
2.5 mm²
General ordering data
Version
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.
1022100000
Type
WDU 2.5 SL
GTIN (EAN)
4008190100513
Qty.
100 pc(s).
Dimensions and weights
Depth
46.5 mm
Depth (inches)
1.831 inch
Height
64 mm
Height (inches)
2.52 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
7.48 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
Rozsah provozní teploty viz EC Design, testovací certifikát / IEC Ex-Osvědčení o shodě
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Material data
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Operating temperature range
Rozsah provozní teploty viz EC Design, testovací certifikát / IEC Ex-Osvědčení o shodě
System specifications
Version
Screw connection, Solder connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
1.5 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
0.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Additional technical data
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Connection type, additional connection
Solder connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Rail
TS 35
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
15 A
Current at maximum wires
15 A
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
1021800000
Type:
WDU 2.5 F 2X2.8
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.:
1021900000
Type:
WDU 2.5 FF 2X2.8
Version:
W-Series, Feed-through terminal, Rated cross-section: 1 mm², Flat-blade connection
Order No.:
1022200000
Type:
WDU 2.5 LL
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Solder connection
Order No.:
1021200000
Type:
WDU 2.5 TS SE 2.4
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.:
1038900000
Type:
WDU 2.5/BLZ/7.62
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 400 V, 21.5 A, Number of connections: 1
Version
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.
1022100000
Type
WDU 2.5 SL
GTIN (EAN)
4008190100513
Qty.
100 pc(s).
Depth
46.5 mm
Depth (inches)
1.831 inch
Height
64 mm
Height (inches)
2.52 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
7.48 g
Storage temperature
-25 °C...55 °C
Operating temperature range
Rozsah provozní teploty viz EC Design, testovací certifikát / IEC Ex-Osvědčení o shodě
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Operating temperature range
Rozsah provozní teploty viz EC Design, testovací certifikát / IEC Ex-Osvědčení o shodě
Version
Screw connection, Solder connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
1.5 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
0.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Connection type, additional connection
Solder connection
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Rail
TS 35
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
15 A
Current at maximum wires
15 A
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
1021800000
Type:
WDU 2.5 F 2X2.8
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.:
1021900000
Type:
WDU 2.5 FF 2X2.8
Version:
W-Series, Feed-through terminal, Rated cross-section: 1 mm², Flat-blade connection
Order No.:
1022200000
Type:
WDU 2.5 LL
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Solder connection
Order No.:
1021200000
Type:
WDU 2.5 TS SE 2.4
Version:
W-Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
Order No.:
1038900000
Type:
WDU 2.5/BLZ/7.62
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 400 V, 21.5 A, Number of connections: 1
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}