Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular test-disconnect terminal blocks
terminal blocks with miscellaneous connection
1-tier
1.5 mm²
2.5 mm²
4 mm²
General ordering data
Version
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
Order No.
0697160000
Type
AKZ 2.5
GTIN (EAN)
4008190121716
Qty.
100 pc(s).
Dimensions and weights
Depth
26.3 mm
Depth (inches)
1.035 inch
Depth including DIN rail
27.1 mm
Height
25.5 mm
Height (inches)
1.004 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
3.439 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material data
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Rating data IECEx/ATEX
Certificate No. (ATEX)
TUEV18ATEX8221U
Certificate No. (IECEX)
IECEXTUR18.0024U
Max. voltage (ATEX)
220 V
Current (ATEX)
24 A
Wire cross section max. (ATEX)
4 mm²
Max. voltage (IECEX)
220 V
Current (IECEX)
24 A
Wire cross section max. (IECEX)
4 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Screw connection, With assembly peg, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 15
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
200039-2124451
Current size C (CSA)
10 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
10 AWG
Wire cross section min. (CSA)
26 AWG
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.5 x 3.0 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
7 mm
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Dimensions
TS 15 offset
11.25 mm
General
Number of poles
1
Rail
TS 15
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
2.5 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
24 A
Current at maximum wires
32 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size B (UR)
10 A
Current size D (UR)
10 A
Voltage size B (UR)
300 V
Voltage size D (UR)
300 V
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
0697180000
Type:
AKZ 2.5 BL
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
Order No.:
0175960000
Type:
AKZ 2.5 O.ZA
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
Version
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
Order No.
0697160000
Type
AKZ 2.5
GTIN (EAN)
4008190121716
Qty.
100 pc(s).
Depth
26.3 mm
Depth (inches)
1.035 inch
Depth including DIN rail
27.1 mm
Height
25.5 mm
Height (inches)
1.004 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
3.439 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Certificate No. (ATEX)
TUEV18ATEX8221U
Certificate No. (IECEX)
IECEXTUR18.0024U
Max. voltage (ATEX)
220 V
Current (ATEX)
24 A
Wire cross section max. (ATEX)
4 mm²
Max. voltage (IECEX)
220 V
Current (IECEX)
24 A
Wire cross section max. (IECEX)
4 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Screw connection, With assembly peg, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 15
N-function
No
PE function
No
PEN function
No
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
200039-2124451
Current size C (CSA)
10 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
10 AWG
Wire cross section min. (CSA)
26 AWG
Connection type, additional connection
Screw connection
Blade size
0.5 x 3.0 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
7 mm
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Number of poles
1
Rail
TS 15
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
2.5 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
24 A
Current at maximum wires
32 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size B (UR)
10 A
Current size D (UR)
10 A
Voltage size B (UR)
300 V
Voltage size D (UR)
300 V
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
0697180000
Type:
AKZ 2.5 BL
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
Order No.:
0175960000
Type:
AKZ 2.5 O.ZA
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 250 V, 24 A, Number of connections: 2
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}