Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
PLC Interfaces and Migration Solutions
Cord sets, Patchcords and Cables
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2-tier
4 mm²
General ordering data
Version
Feed-through terminal block, Screw connection, 4 mm², 250 V, 10 A, Number of connections: 2
Order No.
0536560000
Type
DK 4 SW 1X1
GTIN (EAN)
4008190111069
Qty.
50 pc(s).
Delivery status
Discontinued
Available until
2020-12-31
Alternative product
2540020000
Dimensions and weights
Depth
77.5 mm
Depth (inches)
3.051 inch
Height
50 mm
Height (inches)
1.969 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
12.16 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Material data
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
System specifications
Version
Screw connection, With elbow connection, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
2
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 32
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
8 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Installation advice
Busbar
Rail
TS 32
Standards
IEC 61210, In accordance with IEC 60947-7-1
Other connections
Pin
1 x 1
Pin arrangement
top
Pin on side
right
Rating data
Rated cross-section
4 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Approvals
Approvals
ROHS
Conform
There are no products in this group.
Version
Feed-through terminal block, Screw connection, 4 mm², 250 V, 10 A, Number of connections: 2
Order No.
0536560000
Type
DK 4 SW 1X1
GTIN (EAN)
4008190111069
Qty.
50 pc(s).
Delivery status
Discontinued
Available until
2020-12-31
Alternative product
2540020000
Depth
77.5 mm
Depth (inches)
3.051 inch
Height
50 mm
Height (inches)
1.969 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
12.16 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Version
Screw connection, With elbow connection, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
2
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 32
N-function
No
PE function
No
PEN function
No
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
8 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Installation advice
Busbar
Rail
TS 32
Standards
IEC 61210, In accordance with IEC 60947-7-1
Pin
1 x 1
Pin arrangement
top
Pin on side
right
Rated cross-section
4 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Approvals
ROHS
Conform
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;){kind=spacer}
