General ordering data
Order No.	0105420000
Part designation	SAKT 1/35/LT
Version	SAK terminal test-disconnect terminal, Disconnect and modular disconnect terminal, Rated cross-section: 6 mm², Screw connection, KrG, Medium yellow, Direct mounting
GTIN (EAN)	4008190014056
Qty.	50 pc(s).

Dimensions (1)
Length	65 mm
Width	8 mm

Product notes
Note, technical data	10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm tightening torque.
Note, accessories	To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits with pilots!
Product description	Without STB

Additional technical data
Colour of insulating material	Medium yellow
Connection direction	on side
End cover plate required	Yes
Explosion-tested version	No
Flammability class UL 94	5VA
Installation advice	Direct mounting
Insulating material	KrG
Levels cross-connected internally	No
No. of clamping points per level	2
Number of identical terminals	1
Number of levels	1
Open sides	right
Operating temperature range, max.	130 °C
Operating temperature range, min.	-50 °C
Product family	SAK terminal test-disconnect terminal
Type of connection	Screw connection
Type of mounting	Snap-on

Conductors for clamping (additional connection)
Rated current	41 A
Type of connection	Screw connection
Clamping screw	M 3.5
Blade size	4.0 x 0.8 mm
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.	0.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.	6 mm²
Conductor connection cross-section AWG, min.	AWG 26
Conductor connection cross-section AWG, max.	AWG 8

Conductors for clamping (rated connection)
Clamping range, min.	0.13 mm²
Clamping range, max.	10 mm²
Type of connection	Screw connection
Connection direction	on side
No. of connections	2
Stripping length	12 mm
Clamping screw	M 3.5
Blade size	4.0 x 0.8 mm
Torque setting with DMS electric screwdriver	3
Gauge to IEC 60947-1	A5
Conductor cross-section, solid, min.	0.5 mm²
Conductor cross-section, solid, max.	10 mm²
Stranded, min.	1.5 mm²
Stranded, max.	10 mm²
Conductor cross-section, flexible, max.	6 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, rated connection, min.	0.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, rated connection, max.	6 mm²
Conductor connection cross-section AWG, min.	AWG 26
Conductor connection cross-section AWG, max.	AWG 8

Dimensions
Height of lowest version	52.5 mm

Disconnect terminals
Cross-disconnect	without
Integral test socket	No
Slitting	sliding
Torque setting with DMS electric screwdriver	3

Rating data
Rated cross-section	6 mm²
Rated voltage	400 V
Rated impulse withstand voltage	6 kV
Rated current	41 A
Standards	IEC 60947-7-1
Current with max. conductor	57 A
Pollution severity	3

Approvals
Approvals institutes

Classifications
eClass 5.1	27-14-11-26
eClass 6.0	27-14-11-26