Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Universal range
Application range
Special loads
Sensor isolation
Signal adaption
High switching frequencies
Timing functions
Functional safety
Power
Relay modules with positively driven contacts
SIL3 Safety Relays
SAFESERIES - SIL3 emergency off relay / Fire & Gas
SAFESERIES - SIL3 relay De-energized / energized to Safe
SAFESERIES - SIL3 relay De-energized to Safe
SAFESERIES - SIL3 relay Energized to Safe with line and load monitoring
General ordering data
Version
SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe)
Order No.
1319280000
Type
SCS 24VDC P2SIL3ES
GTIN (EAN)
4050118125078
Qty.
1 pc(s).
Dimensions and weights
Depth
114.1 mm
Depth (inches)
4.492 inch
Height
119.6 mm
Height (inches)
4.709 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
292 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...55 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1, 6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1
SCIP
332bc555-bc84-431d-ba7a-563be05e80bd
Input (power supply)
Connection designation
A1, A2, C1, C2
Rated control voltage
24 V DC ±15 %, 24 VDC +15% / -10% during auto-start
Current consumption
55 mA (release circuit enabled), 6 mA (release circuit not enabled)
Guaranteed current consumption at 24 V DC -10%
35 mA
Inrush current
750 mA / 5 ms (for starting with S33/S34 (start circuit)), 2 A / 20 ms (for starting with A1/A2 (autostart))
Response time
with bridge via C1/C2: typ. 50 ms, without bridge via C1/C2: typ. 20 ms
Status display
LED green: supply, Yellow LED: signal
Protective circuit
Reverse polarity protection, Free-wheeling diode
Short-circuit detection
Yes, max. 4 s up to disconnection (thermistor)
Starting circuit
Anschlussbezeichnung
S33, S34, S35
Operating voltage
22 V DC, from internal power supply
Function
falling edge (button via S33/S34), rising edge (permanent bridge via S33/S35)
Monitoring circuit
Connection designation
S11, S12, S21, S22
Input
2, each externally bridgeable
Operating voltage
22 V DC, from internal power supply
Output (release circuit)
Connection designation
13, 14, 23, 24
Contact design
2 NO positively-driven (EN 50205 type B)
Contact base material
AgSnO
Switching voltage AC, max.
250 V
Max. permissible switching current
5 A
Max. switching current, external fuse
5 A
Max. switching capacity
1250 VA
External back-up fuse
5 A time-lag
Turn-on time
55 ms (C1/C2 bridged, switched via A1/A2), 30 ms (opening/closing of monitoring circuit)
Turn-off time
55 ms (C1/C2 bridged, switched via A1/A2), 15 ms (opening/closing of monitoring circuit)
Min. switching capacity
10 mA @ 12 V
Feedback output
Connection designation
31, 32
Contact design
1 NC positively-driven (EN 50205 type B)
Switching voltage AC, max.
250 V
Max. switching current.
1 A
Safety-related basic specifications
Device type
A
Tproof
12 a
Hardware fault tolerance (HFT)
1
Safety category
SIL 3
Safety standard
DIN EN 61508, EN ISO 13849-1 (PLe)
General data
Operating altitude
≤ 2000 m, above sea level
Rail
TS 35
Colour
black, yellow
Insulation coordination
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Dielectric strength for control side - load side
4 kVeff / 1 min
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
6 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Standards
EN 61000, EN 61326-3-2, EN ISO 13849-1 (PLe)
Equipment for furnaces
EN 50156
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 12
Wire cross-section, solid, min.
0.2 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.2 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Blade size
size PH0
Classifications
ETIM 6.0
EC001449
ETIM 7.0
EC001449
ETIM 8.0
EC001449
ETIM 9.0
EC001449
ECLASS 9.0
27-37-18-19
ECLASS 9.1
27-37-18-19
ECLASS 10.0
27-37-18-19
ECLASS 11.0
27-37-18-19
ECLASS 12.0
27-37-18-19
ECLASS 13.0
27-37-18-19
Approvals
Approvals
ROHS
Conform
There are no products in this group.
Version
SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe)
Order No.
1319280000
Type
SCS 24VDC P2SIL3ES
GTIN (EAN)
4050118125078
Qty.
1 pc(s).
Depth
114.1 mm
Depth (inches)
4.492 inch
Height
119.6 mm
Height (inches)
4.709 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
292 g
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...55 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1, 6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1
SCIP
332bc555-bc84-431d-ba7a-563be05e80bd
Connection designation
A1, A2, C1, C2
Rated control voltage
24 V DC ±15 %, 24 VDC +15% / -10% during auto-start
Current consumption
55 mA (release circuit enabled), 6 mA (release circuit not enabled)
Guaranteed current consumption at 24 V DC -10%
35 mA
Inrush current
750 mA / 5 ms (for starting with S33/S34 (start circuit)), 2 A / 20 ms (for starting with A1/A2 (autostart))
Response time
with bridge via C1/C2: typ. 50 ms, without bridge via C1/C2: typ. 20 ms
Status display
LED green: supply, Yellow LED: signal
Protective circuit
Reverse polarity protection, Free-wheeling diode
Short-circuit detection
Yes, max. 4 s up to disconnection (thermistor)
Anschlussbezeichnung
S33, S34, S35
Operating voltage
22 V DC, from internal power supply
Function
falling edge (button via S33/S34), rising edge (permanent bridge via S33/S35)
Connection designation
S11, S12, S21, S22
Input
2, each externally bridgeable
Operating voltage
22 V DC, from internal power supply
Connection designation
13, 14, 23, 24
Contact design
2 NO positively-driven (EN 50205 type B)
Contact base material
AgSnO
Switching voltage AC, max.
250 V
Max. permissible switching current
5 A
Max. switching current, external fuse
5 A
Max. switching capacity
1250 VA
External back-up fuse
5 A time-lag
Turn-on time
55 ms (C1/C2 bridged, switched via A1/A2), 30 ms (opening/closing of monitoring circuit)
Turn-off time
55 ms (C1/C2 bridged, switched via A1/A2), 15 ms (opening/closing of monitoring circuit)
Min. switching capacity
10 mA @ 12 V
Connection designation
31, 32
Contact design
1 NC positively-driven (EN 50205 type B)
Switching voltage AC, max.
250 V
Max. switching current.
1 A
Device type
A
Tproof
12 a
Hardware fault tolerance (HFT)
1
Safety category
SIL 3
Safety standard
DIN EN 61508, EN ISO 13849-1 (PLe)
Operating altitude
≤ 2000 m, above sea level
Rail
TS 35
Colour
black, yellow
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Dielectric strength for control side - load side
4 kVeff / 1 min
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
6 kV (1.2/50 µs)
Protection degree
IP20
Standards
EN 61000, EN 61326-3-2, EN ISO 13849-1 (PLe)
Equipment for furnaces
EN 50156
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 12
Wire cross-section, solid, min.
0.2 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.2 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Blade size
size PH0
ETIM 6.0
EC001449
ETIM 7.0
EC001449
ETIM 8.0
EC001449
ETIM 9.0
EC001449
ECLASS 9.0
27-37-18-19
ECLASS 9.1
27-37-18-19
ECLASS 10.0
27-37-18-19
ECLASS 11.0
27-37-18-19
ECLASS 12.0
27-37-18-19
ECLASS 13.0
27-37-18-19
Approvals
ROHS
Conform
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.