Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Isolating amplifier and measuring transducer
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
CUBESERIES
D-SERIES
RIDERSERIES
MCZ-SERIES
TERMOPTO
Products
RS
General ordering data
Version
RS-SERIES, Relay module, Number of contacts: 2, CO contact AgNi 90/10, Rated control voltage: 48 V UC ±10 %, Continuous current: 4 A, Screw connection, Test button available: No
Order No.
9406421001
Type
RS 32 48VUC LD LP 2U
GTIN (EAN)
4032248046188
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2010-12-31
Alternative product
1122661001
Dimensions and weights
Depth
63.5 mm
Depth (inches)
2.5 inch
Height
70 mm
Height (inches)
2.756 inch
Width
25 mm
Width (inches)
0.984 inch
Net weight
51.2 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
7b5ffb72-271d-4c73-8b09-bd0aaee3697a
Control side
Rated control voltage
48 V UC ±10 %
Rated current AC
18 mA
Rated current DC
12 mA
Power rating
0.6 W / 0.9 VA
Status indicator
red LED
Protective circuit
Rectifier
Load side
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
6 A
AC switching capacity (resistive), max.
1000 VA
Switch-on delay
< 13 ms
Switch-off delay
≤ 10 ms
Contact type
2 CO contact (AgNi 90/10)
Mechanical service life
30 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 10 V, 100 mA / 5 V DC
General data
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Insulation coordination
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
4 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
RS-SERIES, Relay module, Number of contacts: 2, CO contact AgNi 90/10, Rated control voltage: 48 V UC ±10 %, Continuous current: 4 A, Screw connection, Test button available: No
Order No.
9406421001
Type
RS 32 48VUC LD LP 2U
GTIN (EAN)
4032248046188
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2010-12-31
Alternative product
1122661001
Depth
63.5 mm
Depth (inches)
2.5 inch
Height
70 mm
Height (inches)
2.756 inch
Width
25 mm
Width (inches)
0.984 inch
Net weight
51.2 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
7b5ffb72-271d-4c73-8b09-bd0aaee3697a
Rated control voltage
48 V UC ±10 %
Rated current AC
18 mA
Rated current DC
12 mA
Power rating
0.6 W / 0.9 VA
Status indicator
red LED
Protective circuit
Rectifier
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
6 A
AC switching capacity (resistive), max.
1000 VA
Switch-on delay
< 13 ms
Switch-off delay
≤ 10 ms
Contact type
2 CO contact (AgNi 90/10)
Mechanical service life
30 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 10 V, 100 mA / 5 V DC
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
4 kV (1.2/50 µs)
Protection degree
IP20
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
