Standard signal splitter, output-current loop feed 1-channel signal splitter in 17.5 mm width, output-current loop feed, for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.
Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / nominal cross-section 2.5 mm2 Protection degree: IP 20
Input4...20 mA Output 2 x 4...20 mA Load resistance / R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mA Transmission error < 0,1 % v. E. Auxiliary power 4...20 mA output current loop Ambient temperature range 0°C...+55 °C
Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEX, ATEX
TypeWAS5 CCC 2OLP EX
Short specification
Standard signal splitter, output-current loop feed 1-channel signal splitter in 17.5 mm width, output-current loop feed, for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.
Standard signal splitter, output-current loop feed 1-channel signal splitter in 17.5 mm width, output-current loop feed, for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.
Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / nominal cross-section 2.5 mm2 Protection degree: IP 20
Input4...20 mA Output 2 x 4...20 mA Load resistance / R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mA Transmission error < 0,1 % v. E. Auxiliary power 4...20 mA output current loop Ambient temperature range 0°C...+55 °C
Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEX, ATEX
TypeWAS5 CCC 2OLP EX
Short specification
Standard signal splitter, output-current loop feed 1-channel signal splitter in 17.5 mm width, output-current loop feed, for transmitting and isolating analogue DC current signals from 4 to 20 mA. Approved for ATEX Zone2 UL C1/ Div2 applications.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.