Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
SPDs for energy systems
SPDs for instrumentation and control (I&C)
SPDs for data interfaces
Accessories
Ethernet
RS232
RS485 / RS422
General ordering data
Version
Surge protection for instrumentation and control, with warning function / function indicator, UP (L/N-PE) 250 V
Order No.
8951670000
Type
VSPC RS485 2CH R
GTIN (EAN)
4032248742912
Qty.
1 pc(s).
Dimensions and weights
Depth
69 mm
Depth (inches)
2.717 inch
Height
98 mm
Height (inches)
3.858 inch
Width
17.8 mm
Width (inches)
0.701 inch
Net weight
47 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70 °C
Humidity
5...96 %
Probability of failure
SIL in compliance with IEC 61508
3
MTTF
1,266 a
SFF
93.35 %
λges
90.2
PFH in 1*10-9 per hour
6
Environmental Product Compliance
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
71e97bb7-979f-4330-94c0-20c629bb05e3
CSA protection data
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input voltage, max. Ui
6.4 V
Internal capacity, max. CI
11 nF
Internal inductance, max. LI
0 µH
General data
Colour
orange
Design
Terminal, miscellaneous
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Segment
Measurement - Monitoring - Setting
UL 94 flammability rating
V-0
Version
with warning function / function indicator
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
III
Rated data IEC / EN
Discharge current Imax (8/20µs) GND-PE
10 kA
Discharge current Imax (8/20µs) wire-PE
2 x 10 kA
Discharge current Imax (8/20µs) wire-wire
10 kA
Discharge current In (8/20µs) GND-PE
2.5 kA
Discharge current In (8/20µs) wire-PE
2.5 kA
Discharge current In (8/20µs) wire-wire
2.5 kA
Insertion loss
113.7 MHz
Lightning test current, Iimp (10/350 µs) GND-PE
0.2 kA
Lightning test current, Iimp (10/350 µs) Wire-PE
2 x 0.2 kA
Lightning test current, Iimp (10/350 µs) wire-wire
0.2 kA
Max. continuous voltage, Uc (AC)
5 V
Max. continuous voltage, Uc (DC)
6.4 V
Number of poles
1
Overload - failure mode
Modus 2
Protection level UP (typ.)
250 V
Protection level on output side Wire-PE 1kV/µs, typically
10 V
Protection level on output side Wire-wire 1 kV/µs, typically
10 V
Protection level on output side Wire-wire 8/20 µs, typically
15 V
Protection level, UP GND - PE
500 V
Protection level, UP wire - PE
35 V
Protection level, UP wire - wire
15 V
Pulse-reset capacity
≤ 20 ms
Rated current IN
450 mA
Rated voltage (AC)
5 V
Rated voltage (DC)
5 V
Requirements category acc. to IEC 61643-21
C1, C2, C3, D1
Signal transmission properties (-3 dB)
113.6 MHz
Signalling contact
UN 250 V AC 0.1 A 1CO at VSPC R with VSPC control unit
Standards
IEC 61643-21
Surge current-carrying capacity C1
<1 kA 8/20 μs
Surge current-carrying capacity C2
5 kA 8/20 μs
Surge current-carrying capacity C3
100 A 10/1000 μs
Surge current-carrying capacity D1
2.5 kA 10/350 μs
Voltage type
AC/DC
Volume resistance
2.20 Ω
Connection data
Type of connection
Pluggable in VSPC BASE
Guarantee
Time interval
5 years
Important note
Product information
Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit.
Classifications
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Tender specification sheets
Long specification
Surge protection plug for use in connection with the base element VSPC BASE 2CL for two floating-ground driven signal cables and ground, e.g. for bus systems. Two-stage protection circuit consisting of coarse protection, decoupling resistors and fine protection between the signal wires and additional coarse common mode voltage protection to earth as well as an integrated status display and remote monitoring option. Mechanical identification of the plug to the base element according to the switching type and rated voltage. Protected plug with coding pin and counter-profile for the base element. It is possible to mark the plug.
Short specification
Surge protection plug for base element VSPC BASE 2CL, transverse voltage coarse and fine protection for two floating-ground powered IT signal cables, coarse common mode voltage protection to earth. Version: 5V DC With optional remote monitoring.
Type of connection:
Screw connection
Order No.:
1064980000
Type:
VSSC6 RS485
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 100 V
Type of connection:
Pluggable in VSPC BASE
Order No.:
8924670000
Type:
VSPC RS485 2CH
Version:
Surge protection for instrumentation and control, without warning function / function indicator, UP (L/N-PE) 250 V
Type of connection:
Screw connection
Order No.:
1065010000
Type:
VSSC6 RS485 DP
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 100 V
Type of connection:
Screw connection
Order No.:
1065020000
Type:
VSSC6 RS485 PA EX
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 2 kV
Version
Surge protection for instrumentation and control, with warning function / function indicator, UP (L/N-PE) 250 V
Order No.
8951670000
Type
VSPC RS485 2CH R
GTIN (EAN)
4032248742912
Qty.
1 pc(s).
Depth
69 mm
Depth (inches)
2.717 inch
Height
98 mm
Height (inches)
3.858 inch
Width
17.8 mm
Width (inches)
0.701 inch
Net weight
47 g
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70 °C
Humidity
5...96 %
SIL in compliance with IEC 61508
3
MTTF
1,266 a
SFF
93.35 %
λges
90.2
PFH in 1*10-9 per hour
6
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
71e97bb7-979f-4330-94c0-20c629bb05e3
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input voltage, max. Ui
6.4 V
Internal capacity, max. CI
11 nF
Internal inductance, max. LI
0 µH
Colour
orange
Design
Terminal, miscellaneous
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Segment
Measurement - Monitoring - Setting
UL 94 flammability rating
V-0
Version
with warning function / function indicator
Pollution severity
2
Surge voltage category
III
Discharge current Imax (8/20µs) GND-PE
10 kA
Discharge current Imax (8/20µs) wire-PE
2 x 10 kA
Discharge current Imax (8/20µs) wire-wire
10 kA
Discharge current In (8/20µs) GND-PE
2.5 kA
Discharge current In (8/20µs) wire-PE
2.5 kA
Discharge current In (8/20µs) wire-wire
2.5 kA
Insertion loss
113.7 MHz
Lightning test current, Iimp (10/350 µs) GND-PE
0.2 kA
Lightning test current, Iimp (10/350 µs) Wire-PE
2 x 0.2 kA
Lightning test current, Iimp (10/350 µs) wire-wire
0.2 kA
Max. continuous voltage, Uc (AC)
5 V
Max. continuous voltage, Uc (DC)
6.4 V
Number of poles
1
Overload - failure mode
Modus 2
Protection level UP (typ.)
250 V
Protection level on output side Wire-PE 1kV/µs, typically
10 V
Protection level on output side Wire-wire 1 kV/µs, typically
10 V
Protection level on output side Wire-wire 8/20 µs, typically
15 V
Protection level, UP GND - PE
500 V
Protection level, UP wire - PE
35 V
Protection level, UP wire - wire
15 V
Pulse-reset capacity
≤ 20 ms
Rated current IN
450 mA
Rated voltage (AC)
5 V
Rated voltage (DC)
5 V
Requirements category acc. to IEC 61643-21
C1, C2, C3, D1
Signal transmission properties (-3 dB)
113.6 MHz
Signalling contact
UN 250 V AC 0.1 A 1CO at VSPC R with VSPC control unit
Standards
IEC 61643-21
Surge current-carrying capacity C1
<1 kA 8/20 μs
Surge current-carrying capacity C2
5 kA 8/20 μs
Surge current-carrying capacity C3
100 A 10/1000 μs
Surge current-carrying capacity D1
2.5 kA 10/350 μs
Voltage type
AC/DC
Volume resistance
2.20 Ω
Type of connection
Pluggable in VSPC BASE
Product information
Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit.
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Long specification
Surge protection plug for use in connection with the base element VSPC BASE 2CL for two floating-ground driven signal cables and ground, e.g. for bus systems. Two-stage protection circuit consisting of coarse protection, decoupling resistors and fine protection between the signal wires and additional coarse common mode voltage protection to earth as well as an integrated status display and remote monitoring option. Mechanical identification of the plug to the base element according to the switching type and rated voltage. Protected plug with coding pin and counter-profile for the base element. It is possible to mark the plug.
Short specification
Surge protection plug for base element VSPC BASE 2CL, transverse voltage coarse and fine protection for two floating-ground powered IT signal cables, coarse common mode voltage protection to earth. Version: 5V DC With optional remote monitoring.
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UL)
E311081
Type of connection:
Screw connection
Order No.:
1064980000
Type:
VSSC6 RS485
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 100 V
Type of connection:
Pluggable in VSPC BASE
Order No.:
8924670000
Type:
VSPC RS485 2CH
Version:
Surge protection for instrumentation and control, without warning function / function indicator, UP (L/N-PE) 250 V
Type of connection:
Screw connection
Order No.:
1065010000
Type:
VSSC6 RS485 DP
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 100 V
Type of connection:
Screw connection
Order No.:
1065020000
Type:
VSSC6 RS485 PA EX
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) ≤ 2 kV
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.