Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
Universal signal converter
Current measuring transducer
Frequency signal converter
Limit- & current monitoring
Serial interface converter
Temperature transducer
Signal converter
Rectifier modules
WAS5 PRO RTD 1000
Product is no longer availableData sheet for information only
General ordering data
Version
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT1000, Output : 0(4)-20 mA, 0-10 V
Order No.
8679490000
Type
WAS5 PRO RTD 1000
GTIN (EAN)
4032248813094
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2019-12-31
Alternative product
1176030000
Dimensions and weights
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
103.3 g
Temperatures
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
Probability of failure
MTTF
267 a
Environmental Product Compliance
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
Input
Line resistance in measuring circuit
50 Ω for 3- and 4-conductor
Number of inputs
1
Temperature input range
Configurable, PT1000: -200°C…850 °C, NI1000: -60°C…+250 °C
Output
Fine adjustment
± 12.5 % of FSR; potentiometer: ± 12.5 % ... ± 25 %
Load impedance current
≤ 600 Ω
Number of outputs
1
Offset current
max. 100 µA
Offset voltage
max. 0.05 V
Output current
0...20 mA, 4...20 mA
Output voltage, note
0...10 V
Wire break detection
LED flashing (output value: > 20 mA, >10 V)
load impedance voltage
≥ 1 kΩ
Output (digital)
Status indicator
Module active: LED on/ wire breakage: LED flashing/Error: LED off
General data
Accuracy
< 0.3 % of measured value
Configuration
DIP switch, Potentiometer
Galvanic isolation
3-way isolator
Linearity
Yes
Power consumption
830...880...980 mW at IOUT = 20 mA
Protection degree
IP20
Rail
TS 35
Step response time
Fast/slow:2-/3-/4-conductor: 1.2s/2.3s; potentiometer: 0.5s/1.2s
Temperature coefficient
Voltage supply
24 V DC ± 20 %
Insulation coordination
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Connection data
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Important note
Product information
This product will soon be replaced by a new product.
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
User Documentation
Catalogues
Catalogues in PDF-format
Brochures
Classifications
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Tender specification sheets
Long specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,
Add-on housing for TS35 rail mounting2 Protection degree: IP 20
Type WAS5 PRO RTD 1000
PT1000, Ni1000 2-/3-/4-wire 0/4...20 mATransmission error < 0.8% of input (RTD) Auxiliary power 24 VDC +/- 25 % EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage 2 kV input against output against auxiliary power Rated 300 V AC/DC at overvoltage category III and pollution degree 2
Short specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,
Approvals
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Order No.:
8560700000
Type of connection:
Screw connection
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432220000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432190000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432160000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432130000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/3 V 0-10V
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432280000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432250000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8560720000
Type of connection:
Screw connection
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
Version
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT1000, Output : 0(4)-20 mA, 0-10 V
Order No.
8679490000
Type
WAS5 PRO RTD 1000
GTIN (EAN)
4032248813094
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2019-12-31
Alternative product
1176030000
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
103.3 g
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
Line resistance in measuring circuit
50 Ω for 3- and 4-conductor
Number of inputs
1
Temperature input range
Configurable, PT1000: -200°C…850 °C, NI1000: -60°C…+250 °C
Fine adjustment
± 12.5 % of FSR; potentiometer: ± 12.5 % ... ± 25 %
Load impedance current
≤ 600 Ω
Number of outputs
1
Offset current
max. 100 µA
Offset voltage
max. 0.05 V
Output current
0...20 mA, 4...20 mA
Output voltage, note
0...10 V
Wire break detection
LED flashing (output value: > 20 mA, >10 V)
load impedance voltage
≥ 1 kΩ
Status indicator
Module active: LED on/ wire breakage: LED flashing/Error: LED off
Accuracy
< 0.3 % of measured value
Configuration
DIP switch, Potentiometer
Galvanic isolation
3-way isolator
Linearity
Yes
Power consumption
830...880...980 mW at IOUT = 20 mA
Protection degree
IP20
Rail
TS 35
Step response time
Fast/slow:2-/3-/4-conductor: 1.2s/2.3s; potentiometer: 0.5s/1.2s
Temperature coefficient
Voltage supply
24 V DC ± 20 %
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Product information
This product will soon be replaced by a new product.
Approval/Certificate/Document of Conformity
Engineering Data
User Documentation
Catalogues
Catalogues in PDF-format
Brochures
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Long specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,
Add-on housing for TS35 rail mounting2 Protection degree: IP 20
Type WAS5 PRO RTD 1000
PT1000, Ni1000 2-/3-/4-wire 0/4...20 mATransmission error < 0.8% of input (RTD) Auxiliary power 24 VDC +/- 25 % EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage 2 kV input against output against auxiliary power Rated 300 V AC/DC at overvoltage category III and pollution degree 2
Short specification
RTD measurement isolating transformer; configured with DIP switches RTD measurement isolating transformer in 17.5 mm width with external power supply,
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Order No.:
8560700000
Type of connection:
Screw connection
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432220000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432190000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432160000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432130000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/3 V 0-10V
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8432280000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8432250000
Type of connection:
Tension-clamp connection
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8560720000
Type of connection:
Screw connection
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
-20 mA, 0-10 V',1,'1.0',1,'85607000009999.jpg',false,0);)
-20 mA, 0-10 V',1,'1.0',1,'85607000009999.jpg',false,0);){kind=link}
, Output : 0(4)-20 mA',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
, Output : 0-10 V',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
, Output : 0(4)-20 mA',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
, Output : 0-10 V',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
, Output : 0(4)-20 mA',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
, Output : 0-10 V',1,'1.0',1,'84322100009999.jpg',false,0);){kind=link}
;){kind=link}