Product wizard 
 Website 
English
Deutsch
Français
Italiano
Japanese
Español
Svenska
Россия
繁體中文
简体中文
Polska
한국어
Čeština
Magyar
  
0
0
Quick access
WAS5 CCC 2OLP   Only remaining stock availableDo not use product for new developments
         

Icon
Icon
Icon
Icon
Icon
 

General ordering data

Version Signal converter/insulator, Input : 4-20 mA, Output : 2 x 4-20 mA, (loop powered)
Order No. 8581160000
Type WAS5 CCC 2OLP
GTIN (EAN) 4032248234462
Qty. 1 pc(s).
Delivery status Discontinued
Available until 2022-03-30
Alternative product 7760054122

Dimensions and weights

Depth 112.4 mm
Depth (inches) 4.425 inch
Width 17.5 mm
Width (inches) 0.689 inch
Length 92.4 mm
Length (inches) 3.638 inch
Net weight 87.5 g

Temperatures

Storage temperature -20 °C...85 °C
Operating temperature 0 °C...55

Probability of failure

MTTF 228 a

Environmental Product Compliance

RoHS Compliance Status Compliant
REACH SVHC Lead 7439-92-1
SCIP b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65

Input

Input current 4...20 mA (current loop)
Number of inputs 1
Voltage drop 3.8 V

Output

Cut-off frequency (-3 dB) 30 Hz
Load impedance current RL = (UB-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Number of outputs 2
Output current 2 x 4...20 mA (current loop)
Output signal limit Approx. 31 mA

General data

Accuracy typ. 0.1 %; max 0.2 %
Configuration none
Galvanic isolation Passive isolator
Protection degree IP20
Rail TS 35
Step response time < 20 ms
Temperature coefficient ≤ 150 ppm/K
Voltage supply min. 12 V DC/ max. 30 V DC

Insulation coordination

EMC standards EN 55011, EN 61000-6
Galvanic isolation Passive isolator
Impulse withstand voltage 4 kV
Insulation voltage 4 kVeff / 5 s
Insulation voltage input or output/rail 4 kVeff / 1 min.
Insulation voltage input or output/supply 4 kVeff / 5 s
Pollution severity 2
Rated voltage 300 V
Surge voltage category III

Connection data

Type of connection Screw connection
Stripping length, rated connection 7 mm
Tightening torque, min. 0.4 Nm
Tightening torque, max. 0.5 Nm
Clamping range, rated connection 2.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 2.5 mm²

Important note

Product information This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity
Engineering Data
User Documentation
Catalogues Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0 EC002653
ETIM 7.0 EC002653
ETIM 8.0 EC002653
ETIM 9.0 EC002653
ECLASS 9.0 27-21-01-20
ECLASS 9.1 27-21-01-20
ECLASS 10.0 27-21-01-20
ECLASS 11.0 27-21-01-20
ECLASS 12.0 27-21-01-20
ECLASS 13.0 27-21-01-20
ECLASS 14.0 27-21-01-20

Tender specification sheets

Long specification Standard signal splitter, output-loop powered
1-channel signal splitter in 17.5 mm width, output-loop powered,
for transmitting and isolating analogue DC current signals from 4 to 20 mA.
Add-on housing for TS35 DIN rail installation
Dimensions: L/W/H  92.4/ 17.5/ 112.4 mm
Screw connection / nominal cross-section 2.5 mm²Protection degree: IP 20  Input                         4...20 mAOutput                       2 x 4...20 mA
Load resistance/ R = (UB-12 V) / 20 mA e.g. 600 Ohm at 20 mA
Transmission error       Auxiliary power                   4...20 mA Output current loopAmbient temperature range 0°C...+55 °C                                                






Isolation                                EN 50178 , 2-way isolation up to 4 kV AC/DC
Test voltage                               4 kV
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus


Type                                                            WAS5 CCC 2OLP
Short specification Standard signal splitter, output-loop powered
1-channel signal splitter in 17.5 mm width, output-loop powered, for transmitting and isolating analogue DC current signals from 0/4 to 20 mA.

Approvals

Approvals CE CULUS
ROHS Conform
UL File Number Search UL Website
Certificate no. (cULus) E141197

Related products

Contact
Weidmüller Interface GmbH & Co. KG
 
+49 5231 14-0
+49 5231 14-292083
More information
Decentralised automation solutions
Energy Management Solutions
Industrial Analytics
Industrial IoT Solutions
More information
Mobility Concepts
Photovoltaics
Wind Solutions
Workplace Solutions
More information
Single Pair Ethernet
Weidmüller Configurator
Support & Service
Contact
Disposal Instructions
Engineering data
Repairs and replacement parts