Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
DK-SERIES
General ordering data
Version
DK-SERIES, Relay module, Number of contacts: 1, NO contact Rh/Ru, Rated control voltage: 24 V DC +5% / -10 %, Continuous current: 0.5 A, Screw connection, Test button available: No
Order No.
8215620000
Type
DKR 35 24VDC 1A
GTIN (EAN)
4008190457310
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2016-12-31
Dimensions and weights
Depth
56 mm
Depth (inches)
2.205 inch
Height
65 mm
Height (inches)
2.559 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
17.2 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
bfa70fee-36d4-46cd-9de5-25beb071e19e
Control side
Rated control voltage
24 V DC +5% / -10 %
Rated current DC
9.3 mA
Power rating
225 mW
Status indicator
Green LED
Protective circuit
Free-wheeling diode, Reverse polarity protection
Load side
Max. switching frequency at rated load
25 Hz
Max. switching voltage, AC
100 V
Inrush current
500 mA
AC switching capacity (resistive), max.
10 VA
DC switching capacity (resistive), max.
10 W
Switch-on delay
typically 0.7...2.5 ms
Switch-off delay
typical. 0.2...2.0 ms
Contact type
1 NO contact (Rh/Ru)
Mechanical service life
109 switching cycles
Min. switching power
1 mA @ 1 V
General data
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Open sides
right
Colour
beige
Insulation coordination
Rated voltage
150 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
≥ 3 mm
Dielectric strength to mounting rail
4 kVeff
Impulse withstand voltage
1.5 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section AWG, max.
AWG 12
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
DK-SERIES, Relay module, Number of contacts: 1, NO contact Rh/Ru, Rated control voltage: 24 V DC +5% / -10 %, Continuous current: 0.5 A, Screw connection, Test button available: No
Order No.
8215620000
Type
DKR 35 24VDC 1A
GTIN (EAN)
4008190457310
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2016-12-31
Depth
56 mm
Depth (inches)
2.205 inch
Height
65 mm
Height (inches)
2.559 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
17.2 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1
SCIP
bfa70fee-36d4-46cd-9de5-25beb071e19e
Rated control voltage
24 V DC +5% / -10 %
Rated current DC
9.3 mA
Power rating
225 mW
Status indicator
Green LED
Protective circuit
Free-wheeling diode, Reverse polarity protection
Max. switching frequency at rated load
25 Hz
Max. switching voltage, AC
100 V
Inrush current
500 mA
AC switching capacity (resistive), max.
10 VA
DC switching capacity (resistive), max.
10 W
Switch-on delay
typically 0.7...2.5 ms
Switch-off delay
typical. 0.2...2.0 ms
Contact type
1 NO contact (Rh/Ru)
Mechanical service life
109 switching cycles
Min. switching power
1 mA @ 1 V
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Open sides
right
Colour
beige
Rated voltage
150 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
≥ 3 mm
Dielectric strength to mounting rail
4 kVeff
Impulse withstand voltage
1.5 kV
Protection degree
IP20
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section AWG, max.
AWG 12
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
