Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
DK-SERIES
General ordering data
Version
DK-SERIES, Solid-state relay, Rated control voltage: 115 V UC +5 % / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 50 mA, Screw connection
Order No.
8077860000
Type
DKO 35 115VUC
GTIN (EAN)
4008190401290
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2014-12-31
Alternative product
8950840000
Dimensions and weights
Depth
56 mm
Depth (inches)
2.205 inch
Height
65 mm
Height (inches)
2.559 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
14.6 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
Probability of failure
MTTF
2,280 a
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant
Control side
Rated control voltage
115 V UC +5 % / -15 %
Power rating
390 mVA / 350 mW
Status indicator
Green LED
Input frequency
DC: 100 Hz / AC: 3 Hz
Load side
Rated switching voltage
5...48 V DC
Continuous current
0.05 A
Rated switching current
50 mA
Switch-on delay
17.4 ms
Switch-off delay
27.4 ms
Voltage drop at max. load
1.6 V
Short-circuit-proof
Yes
Protective circuit, load side
Diode circuit
Contact type
1 NO contact (Transistor)
max. switching frequency (AC control voltage)
5 Hz
max. switching frequency (DC control voltage)
20 Hz
Pulse duty factor (gen.)
1:2
General data
Rail
TS 35
Colour
beige
Insulation coordination
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Impulse withstand voltage
6 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Classifications
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Approvals
Approvals
ROHS
Conform
Version
DK-SERIES, Solid-state relay, Rated control voltage: 115 V UC +5 % / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 50 mA, Screw connection
Order No.
8077860000
Type
DKO 35 115VUC
GTIN (EAN)
4008190401290
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2014-12-31
Alternative product
8950840000
Depth
56 mm
Depth (inches)
2.205 inch
Height
65 mm
Height (inches)
2.559 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
14.6 g
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
/
RoHS Compliance Status
Compliant
Rated control voltage
115 V UC +5 % / -15 %
Power rating
390 mVA / 350 mW
Status indicator
Green LED
Input frequency
DC: 100 Hz / AC: 3 Hz
Rated switching voltage
5...48 V DC
Continuous current
0.05 A
Rated switching current
50 mA
Switch-on delay
17.4 ms
Switch-off delay
27.4 ms
Voltage drop at max. load
1.6 V
Short-circuit-proof
Yes
Protective circuit, load side
Diode circuit
Contact type
1 NO contact (Transistor)
max. switching frequency (AC control voltage)
5 Hz
max. switching frequency (DC control voltage)
20 Hz
Pulse duty factor (gen.)
1:2
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Impulse withstand voltage
6 kV
Protection degree
IP20
Wire connection method
Screw connection
Clamping range, rated connection
4 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
4 mm²
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.