Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
OMNIMATE 4.0
OMNIMATE Data PCB connectors
PCB terminals - OMNIMATE Signal
PCB connectors - OMNIMATE Signal
PCB terminals - OMNIMATE Power
PCB connectors - OMNIMATE Power
Feedthrough terminals for devices - OMNIMATE Power
PCB circular connectors - IP67
Sample set - OMNIMATE
OMNIMATE Power - Hybrid
OMNIMATE Power IT
OMNIMATE Power HP
OMNIMATE Power - Powerbus
Accessories
4 mm²
6 mm²
16 mm²
Male header with solder connection
Female plug, PUSH IN spring connection
Female plug, PUSH IN spring connection with pluggable shield connector
Female plug, clamping-yoke connection
Female plug clamping yoke connection with pluggable shield connector
BUF 10.16IT 180MF SH AG
BUF 10.16IT 180MSF SH AG
BUF 10.16IT/03/180MSF2SH200 AG BK BX
General ordering data
Version
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 3, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
Order No.
2627910000
Type
BUF 10.16IT/03/180MSF2SH200 AG BK BX
GTIN (EAN)
4050118631906
Qty.
20 pc(s).
Product data
IEC: 1000 V / 76 A / 2.5 - 16 mm²
Packaging
Box
Delivery status
Discontinued
Dimensions and weights
Depth
122.1 mm
Depth (inches)
4.807 inch
Height
79.1 mm
Height (inches)
3.114 inch
Width
40.64 mm
Width (inches)
1.6 inch
Net weight
0 g
Environmental Product Compliance
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6aI
REACH SVHC
Lead 7439-92-1
SCIP
a9fcc928-8cc3-4126-aede-eb294a2dd7f6
System Parameters
Product family
OMNIMATE Power - series BU/SU 10.16
Type of connection
Field connection
Wire connection method
PUSH IN with actuator
Pitch in mm (P)
10.16 mm
Pitch in inches (P)
0.4 "
Conductor outlet direction
180°
Number of poles
3
L1 in mm
30.48 mm
L1 in inches
1.2 "
Number of rows
1
Pin series quantity
1
Rated cross-section
16 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Touch-safe protection acc. to DIN VDE 0470
IP 20
Protection degree
IP20
Can be coded
Yes
Stripping length
18 mm
Tightening torque for screw flange, min.
0.3 Nm
Tightening torque for screw flange, max.
0.4 Nm
Screwdriver blade
0.8 x 4.0
Screwdriver blade standard
DIN 5264
Plugging cycles
25
Plugging force/pole, max.
15 N
Pulling force/pole, max.
15 N
Material data
Insulating material
PA GF
Colour
black
Colour chart (similar)
RAL 9011
Insulating material group
II
Comparative Tracking Index (CTI)
≥ 400
Insulation strength
≥ 10⁸ Ω
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
silver-plated
Layer structure of plug contact
≥ 3 µm Ag
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Conductors suitable for connection
Clamping range, min.
2.5 mm²
Clamping range, max.
16 mm²
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section AWG, max.
AWG 4
Solid, min. H05(07) V-U
2.5 mm²
Solid, max. H05(07) V-U
10 mm²
Stranded, min. H07V-R
10 mm²
Stranded, max. H07V-R
16 mm²
Flexible, min. H05(07) V-K
2.5 mm²
Flexible, max. H05(07) V-K
16 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
16 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
16 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
2.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H2,5/25D BL
Stripping length
Recommended wire-end ferrule
H2,5/18
Cross-section for conductor connection
Type
fine-wired
nominal
4 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H4,0/26D GR
Stripping length
Recommended wire-end ferrule
H4,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
6 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H6,0/26 SW
Stripping length
Recommended wire-end ferrule
H6,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
10 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H10,0/28 EB
Stripping length
Recommended wire-end ferrule
H10,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
16 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H16,0/28 GN
Stripping length
Recommended wire-end ferrule
H16,0/18
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.
Rated data acc. to IEC
Rated current, min. number of poles (Tu=20°C)
76 A
Rated current, max. number of poles (Tu=20°C)
71 A
Rated current, min. number of poles (Tu=40°C)
70 A
Rated current, max. number of poles (Tu=40°C)
62 A
Rated voltage for surge voltage class / pollution degree II/2
1,000 V
Rated voltage for surge voltage class / pollution degree III/2
1,000 V
Rated voltage for surge voltage class / pollution degree III/3
1,000 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
8 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
8 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
8 kV
Short-time withstand current resistance
3 x 1s with 800A
Rated data acc. to UL 1059
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated current (Use group B / UL 1059)
51 A
Rated current (Use group C / UL 1059)
51 A
Wire cross-section, AWG, min.
AWG 12
Wire cross-section, AWG, max.
AWG 6
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packing
Packaging
Box
VPE length
352 mm
VPE width
162 mm
VPE height
105 mm
Type tests
Test: Durability of markings
Standard
IEC 60068-2-70 / 12.95
Test
mark of origin, type identification, pitch, durability, stripping length
Evaluation
available
Test: Clampable cross section
Standard
IEC 60999-1:1999-11 section 9.1, IEC 60947-1:2011-03 section 8.2.4.5.1
Conductor type
Type of conductor and conductor cross-section
stranded 2.5 mm²
Type of conductor and conductor cross-section
solid 2.5 mm²
Type of conductor and conductor cross-section
stranded 16 mm²
Type of conductor and conductor cross-section
solid 10 mm²
Type of conductor and conductor cross-section
AWG 12/1
Type of conductor and conductor cross-section
AWG 12/19
Type of conductor and conductor cross-section
AWG 4/1
Type of conductor and conductor cross-section
AWG 4/19
Evaluation
passed
Test for damage to and accidental loosening of conductors
Standard
IEC 60999-1:1999-11 section 9.4 bzw. section 8.10
Requirement
0.7 kg
Conductor type
Type of conductor and conductor cross-section
H07V-K2.5
Type of conductor and conductor cross-section
H07V-U2.5
Type of conductor and conductor cross-section
AWG 14/1
Type of conductor and conductor cross-section
AWG 14/19
Evaluation
passed
Requirement
2.9 kg
Conductor type
Type of conductor and conductor cross-section
H07V-K16
Type of conductor and conductor cross-section
H07V-U16
Evaluation
passed
Requirement
4,5 kg
Conductor type
Type of conductor and conductor cross-section
AWG 4/7
Type of conductor and conductor cross-section
AWG 4/19
Pull-out test
Standard
IEC 60999-1:1999-11 section 9.5
Requirement
≥50 N
Conductor type
Type of conductor and conductor cross-section
AWG 14/1
Type of conductor and conductor cross-section
AWG 14/19
Type of conductor and conductor cross-section
H07V-K2.5
Type of conductor and conductor cross-section
H07V-U2.5
Evaluation
passed
Requirement
≥100 N
Conductor type
Type of conductor and conductor cross-section
H07V-K16
Type of conductor and conductor cross-section
H07V-U16
Evaluation
passed
Requirement
≥ 135 N
Conductor type
Type of conductor and conductor cross-section
AWG 4/7
Type of conductor and conductor cross-section
AWG4/19
Evaluation
passed
Important note
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Additional variants on request Rated current related to rated cross-section & min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 Wire end ferrule without plastic collar to DIN 46228/1 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. For all applications with flange we recommend to fix the pin header with the help of the soldering flange or a self-tapping screw on the board. In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
Classifications
ETIM 6.0
EC002638
ETIM 7.0
EC002638
ETIM 8.0
EC002638
ETIM 9.0
EC002638
ECLASS 9.0
27-44-03-09
ECLASS 9.1
27-44-03-09
ECLASS 10.0
27-44-03-09
ECLASS 11.0
27-46-02-02
ECLASS 12.0
27-46-02-02
ECLASS 13.0
27-46-02-02
ECLASS 14.0
27-46-02-02
Approvals
Approvals
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Number of poles:
3
Order No.:
2627860000
Type:
BUF 10.16IT/03/180MSF2SH180 AG BK BX
Colour:
black
Version:
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 3, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
Number of poles:
4
Order No.:
2627950000
Type:
BUF 10.16IT/04/180MSF4SH200 AG BK BX
Colour:
black
Version:
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 4, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
Version
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 3, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
Order No.
2627910000
Type
BUF 10.16IT/03/180MSF2SH200 AG BK BX
GTIN (EAN)
4050118631906
Qty.
20 pc(s).
Product data
IEC: 1000 V / 76 A / 2.5 - 16 mm²
Packaging
Box
Delivery status
Discontinued
Depth
122.1 mm
Depth (inches)
4.807 inch
Height
79.1 mm
Height (inches)
3.114 inch
Width
40.64 mm
Width (inches)
1.6 inch
Net weight
0 g
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6aI
REACH SVHC
Lead 7439-92-1
SCIP
a9fcc928-8cc3-4126-aede-eb294a2dd7f6
Product family
OMNIMATE Power - series BU/SU 10.16
Type of connection
Field connection
Wire connection method
PUSH IN with actuator
Pitch in mm (P)
10.16 mm
Pitch in inches (P)
0.4 "
Conductor outlet direction
180°
Number of poles
3
L1 in mm
30.48 mm
L1 in inches
1.2 "
Number of rows
1
Pin series quantity
1
Rated cross-section
16 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Touch-safe protection acc. to DIN VDE 0470
IP 20
Protection degree
IP20
Can be coded
Yes
Stripping length
18 mm
Tightening torque for screw flange, min.
0.3 Nm
Tightening torque for screw flange, max.
0.4 Nm
Screwdriver blade
0.8 x 4.0
Screwdriver blade standard
DIN 5264
Plugging cycles
25
Plugging force/pole, max.
15 N
Pulling force/pole, max.
15 N
Insulating material
PA GF
Colour
black
Colour chart (similar)
RAL 9011
Insulating material group
II
Comparative Tracking Index (CTI)
≥ 400
Insulation strength
≥ 10⁸ Ω
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
silver-plated
Layer structure of plug contact
≥ 3 µm Ag
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Clamping range, min.
2.5 mm²
Clamping range, max.
16 mm²
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section AWG, max.
AWG 4
Solid, min. H05(07) V-U
2.5 mm²
Solid, max. H05(07) V-U
10 mm²
Stranded, min. H07V-R
10 mm²
Stranded, max. H07V-R
16 mm²
Flexible, min. H05(07) V-K
2.5 mm²
Flexible, max. H05(07) V-K
16 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
16 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
16 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
2.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H2,5/25D BL
Stripping length
Recommended wire-end ferrule
H2,5/18
Cross-section for conductor connection
Type
fine-wired
nominal
4 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H4,0/26D GR
Stripping length
Recommended wire-end ferrule
H4,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
6 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H6,0/26 SW
Stripping length
Recommended wire-end ferrule
H6,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
10 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H10,0/28 EB
Stripping length
Recommended wire-end ferrule
H10,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
16 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H16,0/28 GN
Stripping length
Recommended wire-end ferrule
H16,0/18
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.
Rated current, min. number of poles (Tu=20°C)
76 A
Rated current, max. number of poles (Tu=20°C)
71 A
Rated current, min. number of poles (Tu=40°C)
70 A
Rated current, max. number of poles (Tu=40°C)
62 A
Rated voltage for surge voltage class / pollution degree II/2
1,000 V
Rated voltage for surge voltage class / pollution degree III/2
1,000 V
Rated voltage for surge voltage class / pollution degree III/3
1,000 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
8 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
8 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
8 kV
Short-time withstand current resistance
3 x 1s with 800A
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated current (Use group B / UL 1059)
51 A
Rated current (Use group C / UL 1059)
51 A
Wire cross-section, AWG, min.
AWG 12
Wire cross-section, AWG, max.
AWG 6
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packaging
Box
VPE length
352 mm
VPE width
162 mm
VPE height
105 mm
Test: Durability of markings
Standard
IEC 60068-2-70 / 12.95
Test
mark of origin, type identification, pitch, durability, stripping length
Evaluation
available
Test: Clampable cross section
Standard
IEC 60999-1:1999-11 section 9.1, IEC 60947-1:2011-03 section 8.2.4.5.1
Conductor type
Type of conductor and conductor cross-section
stranded 2.5 mm²
Type of conductor and conductor cross-section
solid 2.5 mm²
Type of conductor and conductor cross-section
stranded 16 mm²
Type of conductor and conductor cross-section
solid 10 mm²
Type of conductor and conductor cross-section
AWG 12/1
Type of conductor and conductor cross-section
AWG 12/19
Type of conductor and conductor cross-section
AWG 4/1
Type of conductor and conductor cross-section
AWG 4/19
Evaluation
passed
Test for damage to and accidental loosening of conductors
Standard
IEC 60999-1:1999-11 section 9.4 bzw. section 8.10
Requirement
0.7 kg
Conductor type
Type of conductor and conductor cross-section
H07V-K2.5
Type of conductor and conductor cross-section
H07V-U2.5
Type of conductor and conductor cross-section
AWG 14/1
Type of conductor and conductor cross-section
AWG 14/19
Evaluation
passed
Requirement
2.9 kg
Conductor type
Type of conductor and conductor cross-section
H07V-K16
Type of conductor and conductor cross-section
H07V-U16
Evaluation
passed
Requirement
4,5 kg
Conductor type
Type of conductor and conductor cross-section
AWG 4/7
Type of conductor and conductor cross-section
AWG 4/19
Pull-out test
Standard
IEC 60999-1:1999-11 section 9.5
Requirement
≥50 N
Conductor type
Type of conductor and conductor cross-section
AWG 14/1
Type of conductor and conductor cross-section
AWG 14/19
Type of conductor and conductor cross-section
H07V-K2.5
Type of conductor and conductor cross-section
H07V-U2.5
Evaluation
passed
Requirement
≥100 N
Conductor type
Type of conductor and conductor cross-section
H07V-K16
Type of conductor and conductor cross-section
H07V-U16
Evaluation
passed
Requirement
≥ 135 N
Conductor type
Type of conductor and conductor cross-section
AWG 4/7
Type of conductor and conductor cross-section
AWG4/19
Evaluation
passed
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Additional variants on request Rated current related to rated cross-section & min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 Wire end ferrule without plastic collar to DIN 46228/1 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. For all applications with flange we recommend to fix the pin header with the help of the soldering flange or a self-tapping screw on the board. In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
ETIM 6.0
EC002638
ETIM 7.0
EC002638
ETIM 8.0
EC002638
ETIM 9.0
EC002638
ECLASS 9.0
27-44-03-09
ECLASS 9.1
27-44-03-09
ECLASS 10.0
27-44-03-09
ECLASS 11.0
27-46-02-02
ECLASS 12.0
27-46-02-02
ECLASS 13.0
27-46-02-02
ECLASS 14.0
27-46-02-02
Approvals
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Number of poles:
3
Order No.:
2627860000
Type:
BUF 10.16IT/03/180MSF2SH180 AG BK BX
Colour:
black
Version:
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 3, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
Number of poles:
4
Order No.:
2627950000
Type:
BUF 10.16IT/04/180MSF4SH200 AG BK BX
Colour:
black
Version:
PCB plug-in connector, female plug, 10.16 mm, Number of poles: 4, 180°, PUSH IN with actuator, Clamping range, max. : 16 mm², Box
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}