Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Isolating amplifier and measuring transducer
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
CUBESERIES
D-SERIES
RIDERSERIES
MCZ-SERIES
TERMOPTO
Products
RIDERSERIES
RCI
General ordering data
Version
RIDERSERIES RCI, Relay module, Number of contacts: 2, CO contact with test button AgNi, Rated control voltage: 230 V AC, Continuous current: 8 A, Screw connection, Test button available: Yes
Order No.
2028940000
Type
RCIKIT230VAC 2COL/PB MC
GTIN (EAN)
4050118406962
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-10-31
Alternative product
2476940000
Dimensions and weights
Depth
61.5 mm
Depth (inches)
2.421 inch
Height
77 mm
Height (inches)
3.031 inch
Width
15.8 mm
Width (inches)
0.622 inch
Net weight
60 g
Temperatures
Storage temperature
-40 °C...70 °C
Operating temperature
-40 °C...70 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Control side
Rated control voltage
230 V AC
Rated current AC
4.4 mA
Power rating
1012 mVA
Coil resistance
32500 Ω ± 15 %
Status indicator
red LED
Load side
Rated switching voltage
250 V AC
Continuous current
8 A
Max. switching frequency at rated load
0.1 Hz
Inrush current
15 A / 4 s
AC switching capacity (resistive), max.
2000 VA
DC switching capacity (resistive), max.
192 W @ 24 V
Switch-on delay
≤ 10 ms
Switch-off delay
≤ 6 ms
Contact type
2 CO contact with test button (AgNi)
Mechanical service life
AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
General data
Version
with metal retaining clip
Rail
TS 35
Test button available
Yes
Version of test button
lockable, just when removing the detend lock
Mechanical switch position indicator
Yes
Colour
black
Insulation coordination
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Insulating material group
IIIa
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength, Input/Output
5 kVeff / 1min
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.
Dielectric strength of open contact
1 kVeff / 1 min
Impulse withstand voltage
5 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Relevant base
8869490000
Relevant relay
8870370000
Certificate no. (CSA) relay
249409-2426937
Certificate no. (CSA) base
249409-2295474
Certificate No. (DNV)
TAA000011A
Certificate no. (cURus) relay
E522350
Certificate no. (cURus) base
E223759
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.7 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
1 mm²
Clamping range, max.
2.5 mm²
Wire cross-section, solid, min.
1 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
1 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
1 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Blade size
size PZ1
Important note
Product information
IP20 without connected conductor at complete opened clamping yoke connection.
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
Catalogues
Catalogues in PDF-format
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
RIDERSERIES RCI, Relay module, Number of contacts: 2, CO contact with test button AgNi, Rated control voltage: 230 V AC, Continuous current: 8 A, Screw connection, Test button available: Yes
Order No.
2028940000
Type
RCIKIT230VAC 2COL/PB MC
GTIN (EAN)
4050118406962
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-10-31
Alternative product
2476940000
Depth
61.5 mm
Depth (inches)
2.421 inch
Height
77 mm
Height (inches)
3.031 inch
Width
15.8 mm
Width (inches)
0.622 inch
Net weight
60 g
Storage temperature
-40 °C...70 °C
Operating temperature
-40 °C...70 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Rated control voltage
230 V AC
Rated current AC
4.4 mA
Power rating
1012 mVA
Coil resistance
32500 Ω ± 15 %
Status indicator
red LED
Rated switching voltage
250 V AC
Continuous current
8 A
Max. switching frequency at rated load
0.1 Hz
Inrush current
15 A / 4 s
AC switching capacity (resistive), max.
2000 VA
DC switching capacity (resistive), max.
192 W @ 24 V
Switch-on delay
≤ 10 ms
Switch-off delay
≤ 6 ms
Contact type
2 CO contact with test button (AgNi)
Mechanical service life
AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
Version
with metal retaining clip
Rail
TS 35
Test button available
Yes
Version of test button
lockable, just when removing the detend lock
Mechanical switch position indicator
Yes
Colour
black
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Insulating material group
IIIa
Creepage and clearance distance input – output
≥ 8 mm
Dielectric strength, Input/Output
5 kVeff / 1min
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.
Dielectric strength of open contact
1 kVeff / 1 min
Impulse withstand voltage
5 kV (1.2/50 µs)
Protection degree
IP20
Relevant base
8869490000
Relevant relay
8870370000
Certificate no. (CSA) relay
249409-2426937
Certificate no. (CSA) base
249409-2295474
Certificate No. (DNV)
TAA000011A
Certificate no. (cURus) relay
E522350
Certificate no. (cURus) base
E223759
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.7 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
1 mm²
Clamping range, max.
2.5 mm²
Wire cross-section, solid, min.
1 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
1 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
1 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Blade size
size PZ1
Product information
IP20 without connected conductor at complete opened clamping yoke connection.
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
