Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
OMNIMATE 4.0
OMNIMATE Data PCB connectors
PCB terminals - OMNIMATE Signal
PCB connectors - OMNIMATE Signal
PCB terminals - OMNIMATE Power
PCB connectors - OMNIMATE Power
Feedthrough terminals for devices - OMNIMATE Power
PCB circular connectors - IP67
Sample set - OMNIMATE
Clamping yoke screw connection
Leaf spring screw connection
PUSH IN spring connection
Tension clamp spring connection
Flat-blade connection
Accessories
2.5 mm² (AWG 14) - Pitch 5.00-5.08 mm - LMZF 5
2.5 mm² (AWG 14) - Pitch 7.50-7.62 mm - LMZF 7
2.5 mm² (AWG 14) - Pitch 10.00-10.16 mm - LMZF 10
2.5 mm² (AWG 14) - Pitch 5.08 mm - LMZF 5.08 multi-level
LMZF 5/135
LMZFL 5/135
General ordering data
Version
Printed circuit board terminals, 5.00 mm, Number of poles: 22, 135°, Solder pin length (l): 3.5 mm, tinned, Pale green, Clamping range, max. : 2.5 mm², Box
Order No.
1959970000
Type
LMZF 5/22/135 3.5GN
GTIN (EAN)
4032248650958
Qty.
50 pc(s).
Product data
IEC: 630 V / 24 A / 0.13 - 2.5 mm²
Packaging
Box
Delivery status
Discontinued
Dimensions and weights
Depth
14.5 mm
Depth (inches)
0.571 inch
Height
16.4 mm
Height (inches)
0.646 inch
Height of lowest version
12.9 mm
Width
112.5 mm
Width (inches)
4.429 inch
Net weight
28.62 g
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
System parameters
Product family
OMNIMATE Signal - series LMZF
Mounting onto the PCB
THT solder connection
Conductor outlet direction
135°
Pitch in mm (P)
5 mm
Pitch in inches (P)
0.197 "
Number of poles
22
Pin series quantity
1
Fitted by customer
No
Number of rows
1
Max. adjacent poles per row
48
Solder pin length (l)
3.5 mm
Solder pin dimensions
0.8 x 0.8 mm
Solder eyelet hole diameter (D)
1.3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm
Number of solder pins per pole
2
Screwdriver blade
0.4 x 2.5
Screwdriver blade standard
DIN 5264-A
Stripping length
6 mm
L1 in mm
105 mm
L1 in inches
4.134 "
Touch-safe protection acc. to DIN VDE 0470
IP 20
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Protection degree
IP20
Insulation strength
≥ 108 Ω
Material data
Insulating material
Wemid (PA)
Colour
Pale green
Colour chart (similar)
RAL 6021
Insulating material group
I
Comparative Tracking Index (CTI)
≥ 600
Insulation strength
≥ 108 Ω
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
tinned
Coating
5-8 μm SN
Tinning type
matt
Layer structure of solder connection
4...6 µm Sn matt
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C
Conductors suitable for connection
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 14
Solid, min. H05(07) V-U
0.13 mm²
Solid, max. H05(07) V-U
2.5 mm²
Flexible, min. H05(07) V-K
0.13 mm²
Flexible, max. H05(07) V-K
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1.5 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
0.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,5/12 OR
Stripping length
Recommended wire-end ferrule
H0,5/6
Cross-section for conductor connection
Type
fine-wired
nominal
0.75 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,75/12 W
Stripping length
Recommended wire-end ferrule
H0,75/6
Cross-section for conductor connection
Type
fine-wired
nominal
1 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H1,0/12 GE
Stripping length
Recommended wire-end ferrule
H1,0/6
Cross-section for conductor connection
Type
fine-wired
nominal
0.25 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,25/5
Cross-section for conductor connection
Type
fine-wired
nominal
0.34 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,34/10 TK
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. number of poles (Tu=20°C)
24 A
Rated current, max. number of poles (Tu=20°C)
24 A
Rated current, min. number of poles (Tu=40°C)
24 A
Rated current, max. number of poles (Tu=40°C)
24 A
Rated voltage for surge voltage class / pollution degree II/2
630 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Rated data acc. to CSA
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26
Wire cross-section, AWG, max.
AWG 14
Rated data acc. to UL 1059
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
15 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26
Wire cross-section, AWG, max.
AWG 14
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packing
Packaging
Box
VPE length
60 mm
VPE width
270 mm
VPE height
290 mm
Important note
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
Approvals
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Show all
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Number of poles:
2
Order No.:
1913780000
Type:
LMZF 5/2/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 2, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
3
Order No.:
1913820000
Type:
LMZF 5/3/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
4
Order No.:
1913960000
Type:
LMZF 5/4/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 4, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
5
Order No.:
1914000000
Type:
LMZF 5/5/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 5, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
6
Order No.:
1914020000
Type:
LMZF 5/6/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 6, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
7
Order No.:
1914030000
Type:
LMZF 5/7/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 7, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
8
Order No.:
1914040000
Type:
LMZF 5/8/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 8, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
9
Order No.:
1914050000
Type:
LMZF 5/9/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
10
Order No.:
1914070000
Type:
LMZF 5/10/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
11
Order No.:
1914080000
Type:
LMZF 5/11/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 11, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
12
Order No.:
1914090000
Type:
LMZF 5/12/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 12, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
13
Order No.:
1960140000
Type:
LMZF 5/13/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 13, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
14
Order No.:
1960150000
Type:
LMZF 5/14/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 14, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
15
Order No.:
1960160000
Type:
LMZF 5/15/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 15, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
16
Order No.:
1960170000
Type:
LMZF 5/16/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 16, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
17
Order No.:
1960180000
Type:
LMZF 5/17/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 17, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
18
Order No.:
1960190000
Type:
LMZF 5/18/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
19
Order No.:
1960200000
Type:
LMZF 5/19/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 19, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
20
Order No.:
1960210000
Type:
LMZF 5/20/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 20, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
21
Order No.:
1960220000
Type:
LMZF 5/21/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 21, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
22
Order No.:
1960230000
Type:
LMZF 5/22/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 22, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
23
Order No.:
1960240000
Type:
LMZF 5/23/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 23, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
24
Order No.:
1960250000
Type:
LMZF 5/24/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 24, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Version
Printed circuit board terminals, 5.00 mm, Number of poles: 22, 135°, Solder pin length (l): 3.5 mm, tinned, Pale green, Clamping range, max. : 2.5 mm², Box
Order No.
1959970000
Type
LMZF 5/22/135 3.5GN
GTIN (EAN)
4032248650958
Qty.
50 pc(s).
Product data
IEC: 630 V / 24 A / 0.13 - 2.5 mm²
Packaging
Box
Delivery status
Discontinued
Depth
14.5 mm
Depth (inches)
0.571 inch
Height
16.4 mm
Height (inches)
0.646 inch
Height of lowest version
12.9 mm
Width
112.5 mm
Width (inches)
4.429 inch
Net weight
28.62 g
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Product family
OMNIMATE Signal - series LMZF
Mounting onto the PCB
THT solder connection
Conductor outlet direction
135°
Pitch in mm (P)
5 mm
Pitch in inches (P)
0.197 "
Number of poles
22
Pin series quantity
1
Fitted by customer
No
Number of rows
1
Max. adjacent poles per row
48
Solder pin length (l)
3.5 mm
Solder pin dimensions
0.8 x 0.8 mm
Solder eyelet hole diameter (D)
1.3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm
Number of solder pins per pole
2
Screwdriver blade
0.4 x 2.5
Screwdriver blade standard
DIN 5264-A
Stripping length
6 mm
L1 in mm
105 mm
L1 in inches
4.134 "
Touch-safe protection acc. to DIN VDE 0470
IP 20
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Protection degree
IP20
Insulation strength
≥ 108 Ω
Insulating material
Wemid (PA)
Colour
Pale green
Colour chart (similar)
RAL 6021
Insulating material group
I
Comparative Tracking Index (CTI)
≥ 600
Insulation strength
≥ 108 Ω
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
tinned
Coating
5-8 μm SN
Tinning type
matt
Layer structure of solder connection
4...6 µm Sn matt
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 14
Solid, min. H05(07) V-U
0.13 mm²
Solid, max. H05(07) V-U
2.5 mm²
Flexible, min. H05(07) V-K
0.13 mm²
Flexible, max. H05(07) V-K
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1.5 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
0.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,5/12 OR
Stripping length
Recommended wire-end ferrule
H0,5/6
Cross-section for conductor connection
Type
fine-wired
nominal
0.75 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,75/12 W
Stripping length
Recommended wire-end ferrule
H0,75/6
Cross-section for conductor connection
Type
fine-wired
nominal
1 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H1,0/12 GE
Stripping length
Recommended wire-end ferrule
H1,0/6
Cross-section for conductor connection
Type
fine-wired
nominal
0.25 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,25/5
Cross-section for conductor connection
Type
fine-wired
nominal
0.34 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H0,34/10 TK
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. number of poles (Tu=20°C)
24 A
Rated current, max. number of poles (Tu=20°C)
24 A
Rated current, min. number of poles (Tu=40°C)
24 A
Rated current, max. number of poles (Tu=40°C)
24 A
Rated voltage for surge voltage class / pollution degree II/2
630 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26
Wire cross-section, AWG, max.
AWG 14
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
15 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26
Wire cross-section, AWG, max.
AWG 14
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packaging
Box
VPE length
60 mm
VPE width
270 mm
VPE height
290 mm
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Show all
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Number of poles:
2
Order No.:
1913780000
Type:
LMZF 5/2/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 2, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
3
Order No.:
1913820000
Type:
LMZF 5/3/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 3, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
4
Order No.:
1913960000
Type:
LMZF 5/4/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 4, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
5
Order No.:
1914000000
Type:
LMZF 5/5/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 5, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
6
Order No.:
1914020000
Type:
LMZF 5/6/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 6, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
7
Order No.:
1914030000
Type:
LMZF 5/7/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 7, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
8
Order No.:
1914040000
Type:
LMZF 5/8/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 8, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
9
Order No.:
1914050000
Type:
LMZF 5/9/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
10
Order No.:
1914070000
Type:
LMZF 5/10/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
11
Order No.:
1914080000
Type:
LMZF 5/11/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 11, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
12
Order No.:
1914090000
Type:
LMZF 5/12/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 12, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
13
Order No.:
1960140000
Type:
LMZF 5/13/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 13, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
14
Order No.:
1960150000
Type:
LMZF 5/14/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 14, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
15
Order No.:
1960160000
Type:
LMZF 5/15/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 15, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
16
Order No.:
1960170000
Type:
LMZF 5/16/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 16, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
17
Order No.:
1960180000
Type:
LMZF 5/17/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 17, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
18
Order No.:
1960190000
Type:
LMZF 5/18/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
19
Order No.:
1960200000
Type:
LMZF 5/19/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 19, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
20
Order No.:
1960210000
Type:
LMZF 5/20/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 20, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
21
Order No.:
1960220000
Type:
LMZF 5/21/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 21, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
22
Order No.:
1960230000
Type:
LMZF 5/22/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 22, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
23
Order No.:
1960240000
Type:
LMZF 5/23/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 23, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
24
Order No.:
1960250000
Type:
LMZF 5/24/135 3.5OR
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.00 mm, Number of poles: 24, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
: 3.5 mm, tinned, Pale green, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'19138200009999.jpg',false,0);)
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913780000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913780000_iso_bottom.jpg',true,5);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913820000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913820000_iso_bottom.jpg',true,5);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913960000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1913960000_iso_bottom.jpg',true,5);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914000000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914000000_iso_bottom.jpg',true,5);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914020000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914030000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914040000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914050000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914070000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914080000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1914090000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1960140000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1960150000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1960160000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'100.0',1,'1960170000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960180000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960190000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960200000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960210000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960220000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960230000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960240000_iso_bottom.jpg',false,0);){kind=link}
: 3.5 mm, tinned, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'1960250000_iso_bottom.jpg',false,0);){kind=link}