Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
Z-Series
Standard
Roof
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Modular terminal blocks with electronic components
1-tier
2-tier
16 mm²
2.5 mm²
4 mm²
6 mm²
General ordering data
Version
Z-series, PE terminal, Rated cross-section: 6 mm², Tension-clamp connection, Green/yellow
Order No.
1771360000
Type
ZPE 6-2/3AN
GTIN (EAN)
4032248142958
Qty.
50 pc(s).
Dimensions and weights
Depth
49.19 mm
Depth (inches)
1.937 inch
Depth including DIN rail
50 mm
Height
68 mm
Height (inches)
2.677 inch
Width
8.1 mm
Width (inches)
0.319 inch
Net weight
24.74 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO16ATEX1808U
Certificate No. (IECEX)
IECEXULD16.0036U
Wire cross section max. (ATEX)
10 mm²
Wire cross section max. (IECEX)
10 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
3
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
PE function
Yes
PEN function
No
Additional technical data
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
20 AWG
Conductors for clamping (additional connection)
Connection type, additional connection
Tension-clamp connection
Conductors for clamping (rated connection)
Blade size
0.8 x 4.0 mm
Clamping range, max.
10 mm²
Clamping range, min.
0.22 mm²
Connection cross-section, stranded, max.
6 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A5
Number of connections
3
Stripping length
12 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
10 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
PE rating data
Rated short-time current
720 A (6 mm²)
PEN function
No
Rating data
Rated cross-section
6 mm²
Rated voltage to adjoining terminal
800 V
Rated DC voltage
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.78 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
1.31 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
22 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
Classifications
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Order No.:
1771370000
Type:
ZPE 6-2/2AN
Version:
Z-series, PE terminal, Rated cross-section: 6 mm², Tension-clamp connection, Green/yellow
Version
Z-series, PE terminal, Rated cross-section: 6 mm², Tension-clamp connection, Green/yellow
Order No.
1771360000
Type
ZPE 6-2/3AN
GTIN (EAN)
4032248142958
Qty.
50 pc(s).
Depth
49.19 mm
Depth (inches)
1.937 inch
Depth including DIN rail
50 mm
Height
68 mm
Height (inches)
2.677 inch
Width
8.1 mm
Width (inches)
0.319 inch
Net weight
24.74 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Certificate No. (ATEX)
DEMKO16ATEX1808U
Certificate No. (IECEX)
IECEXULD16.0036U
Wire cross section max. (ATEX)
10 mm²
Wire cross section max. (IECEX)
10 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
3
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
PE function
Yes
PEN function
No
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
20 AWG
Connection type, additional connection
Tension-clamp connection
Blade size
0.8 x 4.0 mm
Clamping range, max.
10 mm²
Clamping range, min.
0.22 mm²
Connection cross-section, stranded, max.
6 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A5
Number of connections
3
Stripping length
12 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
10 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 22
Rated short-time current
720 A (6 mm²)
PEN function
No
Rated cross-section
6 mm²
Rated voltage to adjoining terminal
800 V
Rated DC voltage
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.78 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
1.31 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
22 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
1771370000
Type:
ZPE 6-2/2AN
Version:
Z-series, PE terminal, Rated cross-section: 6 mm², Tension-clamp connection, Green/yellow
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}