Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
OMNIMATE 4.0
OMNIMATE Data PCB connectors
PCB terminals - OMNIMATE Signal
PCB connectors - OMNIMATE Signal
PCB terminals - OMNIMATE Power
PCB connectors - OMNIMATE Power
Feedthrough terminals for devices - OMNIMATE Power
PCB circular connectors - IP67
Sample set - OMNIMATE
Clamping yoke screw connection
Leaf spring screw connection
PUSH IN spring connection
Tension clamp spring connection
Flat-blade connection
Accessories
2.5 mm² (AWG 14) - Pitch 5.00-5.08 mm - LMZF 5
2.5 mm² (AWG 14) - Pitch 7.50-7.62 mm - LMZF 7
2.5 mm² (AWG 14) - Pitch 10.00-10.16 mm - LMZF 10
2.5 mm² (AWG 14) - Pitch 5.08 mm - LMZF 5.08 multi-level
LM2NZF 5.08
LM3RZF 5.08
LM3RZF 5.08/21/135 3.5SN OR BX
General ordering data
Version
Printed circuit board terminals, 5.08 mm, Number of poles: 21, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Order No.
1758040000
Type
LM3RZF 5.08/21/135 3.5SN OR BX
GTIN (EAN)
4032248102877
Qty.
20 pc(s).
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
Packaging
Box
Dimensions and weights
Depth
32.2 mm
Depth (inches)
1.268 inch
Height
40.1 mm
Height (inches)
1.579 inch
Height of lowest version
36.6 mm
Width
36.26 mm
Width (inches)
1.428 inch
Net weight
34.95 g
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
System parameters
Product family
OMNIMATE Signal - series LMZF
Wire connection method
Tension-clamp connection
Mounting onto the PCB
THT solder connection
Conductor outlet direction
135°
Pitch in mm (P)
5.08 mm
Pitch in inches (P)
0.2 "
Number of poles
21
Pin series quantity
3
Fitted by customer
No
Number of rows
3
Solder pin length (l)
3.5 mm
Solder pin dimensions
0.7 x 1.0 mm
Solder eyelet hole diameter (D)
1.3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm
Number of solder pins per pole
1
Screwdriver blade
0.6 x 3.5
Screwdriver blade standard
DIN 5264-A
Stripping length
7.5 mm
L1 in mm
30.48 mm
L1 in inches
1.2 "
Touch-safe protection acc. to DIN VDE 0470
IP 20
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Protection degree
IP20
Volume resistance
2.10 mΩ
Material data
Insulating material
PA
Colour
orange
Colour chart (similar)
RAL 2000
Insulating material group
I
Comparative Tracking Index (CTI)
≥ 600
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C
Conductors suitable for connection
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 24
Wire connection cross section AWG, max.
AWG 14
Solid, min. H05(07) V-U
0.2 mm²
Solid, max. H05(07) V-U
2.5 mm²
Flexible, min. H05(07) V-K
0.2 mm²
Flexible, max. H05(07) V-K
1.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1.5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
1.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H1,5/7
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. number of poles (Tu=20°C)
15 A
Rated current, max. number of poles (Tu=20°C)
12 A
Rated current, min. number of poles (Tu=40°C)
13 A
Rated current, max. number of poles (Tu=40°C)
10 A
Rated voltage for surge voltage class / pollution degree II/2
630 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Rated data acc. to CSA
Institute (CSA)
Certificate No. (CSA)
200039-1815154
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24
Wire cross-section, AWG, max.
AWG 14
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Rated data acc. to UL 1059
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24
Wire cross-section, AWG, max.
AWG 14
Packing
Packaging
Box
VPE length
211 mm
VPE width
105 mm
VPE height
40 mm
Important note
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
Classifications
ETIM 6.0
EC002643
ETIM 7.0
EC002643
ETIM 8.0
EC002643
ETIM 9.0
EC002643
ECLASS 9.0
27-44-04-01
ECLASS 9.1
27-44-04-01
ECLASS 10.0
27-44-04-01
ECLASS 11.0
27-46-01-01
ECLASS 12.0
27-46-01-01
ECLASS 13.0
27-46-01-01
ECLASS 14.0
27-46-01-01
Approvals
Approvals
ROHS
Conform
Show all
6
9
12
15
18
24
27
30
33
36
48
Number of poles:
6
Order No.:
1764910000
Type:
LM3RZF 5.08/06/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 6, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
9
Order No.:
1764920000
Type:
LM3RZF 5.08/09/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
12
Order No.:
1764930000
Type:
LM3RZF 5.08/12/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 12, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
15
Order No.:
1764940000
Type:
LM3RZF 5.08/15/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 15, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
18
Order No.:
1764950000
Type:
LM3RZF 5.08/18/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
24
Order No.:
1764960000
Type:
LM3RZF 5.08/24/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 24, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
27
Order No.:
1764970000
Type:
LM3RZF 5.08/27/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 27, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
30
Order No.:
1758030000
Type:
LM3RZF 5.08/30/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 30, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
33
Order No.:
1764980000
Type:
LM3RZF 5.08/33/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 33, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
36
Order No.:
1764990000
Type:
LM3RZF 5.08/36/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 36, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
48
Order No.:
1758050000
Type:
LM3RZF 5.08/48/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 48, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Version
Printed circuit board terminals, 5.08 mm, Number of poles: 21, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Order No.
1758040000
Type
LM3RZF 5.08/21/135 3.5SN OR BX
GTIN (EAN)
4032248102877
Qty.
20 pc(s).
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
Packaging
Box
Depth
32.2 mm
Depth (inches)
1.268 inch
Height
40.1 mm
Height (inches)
1.579 inch
Height of lowest version
36.6 mm
Width
36.26 mm
Width (inches)
1.428 inch
Net weight
34.95 g
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Product family
OMNIMATE Signal - series LMZF
Wire connection method
Tension-clamp connection
Mounting onto the PCB
THT solder connection
Conductor outlet direction
135°
Pitch in mm (P)
5.08 mm
Pitch in inches (P)
0.2 "
Number of poles
21
Pin series quantity
3
Fitted by customer
No
Number of rows
3
Solder pin length (l)
3.5 mm
Solder pin dimensions
0.7 x 1.0 mm
Solder eyelet hole diameter (D)
1.3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm
Number of solder pins per pole
1
Screwdriver blade
0.6 x 3.5
Screwdriver blade standard
DIN 5264-A
Stripping length
7.5 mm
L1 in mm
30.48 mm
L1 in inches
1.2 "
Touch-safe protection acc. to DIN VDE 0470
IP 20
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch
Protection degree
IP20
Volume resistance
2.10 mΩ
Insulating material
PA
Colour
orange
Colour chart (similar)
RAL 2000
Insulating material group
I
Comparative Tracking Index (CTI)
≥ 600
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C
Clamping range, min.
0.13 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 24
Wire connection cross section AWG, max.
AWG 14
Solid, min. H05(07) V-U
0.2 mm²
Solid, max. H05(07) V-U
2.5 mm²
Flexible, min. H05(07) V-K
0.2 mm²
Flexible, max. H05(07) V-K
1.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1.5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
1.5 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H1,5/7
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
tested acc. to standard
IEC 60664-1, IEC 61984
Rated current, min. number of poles (Tu=20°C)
15 A
Rated current, max. number of poles (Tu=20°C)
12 A
Rated current, min. number of poles (Tu=40°C)
13 A
Rated current, max. number of poles (Tu=40°C)
10 A
Rated voltage for surge voltage class / pollution degree II/2
630 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Institute (CSA)
Certificate No. (CSA)
200039-1815154
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24
Wire cross-section, AWG, max.
AWG 14
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24
Wire cross-section, AWG, max.
AWG 14
Packaging
Box
VPE length
211 mm
VPE width
105 mm
VPE height
40 mm
IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Notes
Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
ETIM 6.0
EC002643
ETIM 7.0
EC002643
ETIM 8.0
EC002643
ETIM 9.0
EC002643
ECLASS 9.0
27-44-04-01
ECLASS 9.1
27-44-04-01
ECLASS 10.0
27-44-04-01
ECLASS 11.0
27-46-01-01
ECLASS 12.0
27-46-01-01
ECLASS 13.0
27-46-01-01
ECLASS 14.0
27-46-01-01
Approvals
ROHS
Conform
Show all
6
9
12
15
18
24
27
30
33
36
48
Number of poles:
6
Order No.:
1764910000
Type:
LM3RZF 5.08/06/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 6, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
9
Order No.:
1764920000
Type:
LM3RZF 5.08/09/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
12
Order No.:
1764930000
Type:
LM3RZF 5.08/12/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 12, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
15
Order No.:
1764940000
Type:
LM3RZF 5.08/15/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 15, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
18
Order No.:
1764950000
Type:
LM3RZF 5.08/18/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
24
Order No.:
1764960000
Type:
LM3RZF 5.08/24/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 24, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
27
Order No.:
1764970000
Type:
LM3RZF 5.08/27/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 27, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
30
Order No.:
1758030000
Type:
LM3RZF 5.08/30/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 30, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
33
Order No.:
1764980000
Type:
LM3RZF 5.08/33/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 33, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
36
Order No.:
1764990000
Type:
LM3RZF 5.08/36/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 36, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
Number of poles:
48
Order No.:
1758050000
Type:
LM3RZF 5.08/48/135 3.5SN OR BX
Colour:
orange
Solder pin length (l):
3.5 mm
Version:
Printed circuit board terminals, 5.08 mm, Number of poles: 48, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'20.0',1,'17649400009999.jpg',false,0);)
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',true,5);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',true,5);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'50.0',1,'17649400009999.jpg',true,5);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'20.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'20.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}
: 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box',1,'10.0',1,'17649400009999.jpg',false,0);){kind=link}