Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
SPDs for energy systems
SPDs for instrumentation and control (I&C)
SPDs for data interfaces
Accessories
AC voltage
Photovoltaics
DIN rail TS 35
40mm busbars
Type I
Type II
Type III
VPU Type I Series
VPU Type II Series
Class I, LPL I,II,III,IV with remote alert
Class I, LPL I,II,III,IV without remote alert
Class I, LPL III,IV with remote alert
Class I, LPL III,IV without remote alert
LPL I,II,III,IV N-PE sparkover gap 260 V / 440 V
VPU I spare arrester
VPU I 280 V
VPU I 280 V LCF
VPU I 400 V
General ordering data
Version
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
Order No.
1352290000
Type
VPU I 1 400V/12,5KA
GTIN (EAN)
4050118157987
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2022-05-19
Alternative product
2591510000
Dimensions and weights
Depth
69 mm
Depth (inches)
2.717 inch
Height
94 mm
Height (inches)
3.701 inch
Width
17.8 mm
Width (inches)
0.701 inch
Mounting dimension - height
75 mm
Net weight
202 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5 - 95% rel. humidity
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
General data
Colour
black, orange
Design
Installation housing; 1TE, Insta IP 20
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Rail
TS 35
Segment
Power distribution
UL 94 flammability rating
V-0
Version
without telecomm. contact
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
IV
Rated data IEC / EN
Discharge current Imax (8/20µs) wire-PE
50 kA
Discharge current In (8/20µs) wire-PE
20 kA
Energy coordination (≤10 m)
Type I, Type II, Type III
Follow-on current extinguishing capability Ifi
Not available due for technical reasons
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG
Leakage current at Un
100 µA
Lightning test current Iimp (10/350 µs) (L-PE)
12.5 kA
Low voltage network
Single-phase
Mains voltage
240 V
Max. continuous voltage, Uc (AC)
400 V
Number of poles
1
Protection level Up at IN (L/N-PE)
≤ 1.8 kV
Rated voltage (AC)
400 V
Requirements category acc. to IEC 61643-11
Type I, Type II
Requirements class, acc. to EN 61643-11
T1, T2
Response time
≤ 25 ns
Short-circuit current rating ISCCR
25 kA
Signalling contact
No
Standards
IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV
620 V
Voltage type
AC
Connection data
Stripping length
15 mm
Type of connection
Screw connection
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2.5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection cross-section, stranded, max.
50 mm²
Classifications
ETIM 6.0
EC000941
ETIM 7.0
EC000941
ETIM 8.0
EC000941
ETIM 9.0
EC000941
ECLASS 9.0
27-13-08-05
ECLASS 9.1
27-13-08-05
ECLASS 10.0
27-13-08-05
ECLASS 11.0
27-13-08-05
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Tender specification sheets
Long specification
Class I arrestor made from V0 material for LPL III/IV with 12.5 kA, suitable for 400/690 V single-phase mains systems, tested in accordance with IEC61643-11, EN61643-11:2013. Protection level < 1.8 kV. Type: Weidmüller VPU I 1 400 V/12.5 kA Order No. 1352290000 or equivalent
Short specification
Class I arrester for LPL III/IV with 12.5 kA suitable for 400/690 V single-phase mains systems. Protection level < 1.8 kV. Type: Weidmüller VPU I 1 400 V/12.5 kA Order no. 1352290000 or equivalent
Approvals
Approvals
ROHS
Conform
Version
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
Order No.
1352290000
Type
VPU I 1 400V/12,5KA
GTIN (EAN)
4050118157987
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2022-05-19
Alternative product
2591510000
Depth
69 mm
Depth (inches)
2.717 inch
Height
94 mm
Height (inches)
3.701 inch
Width
17.8 mm
Width (inches)
0.701 inch
Mounting dimension - height
75 mm
Net weight
202 g
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5 - 95% rel. humidity
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Colour
black, orange
Design
Installation housing; 1TE, Insta IP 20
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Rail
TS 35
Segment
Power distribution
UL 94 flammability rating
V-0
Version
without telecomm. contact
Pollution severity
2
Surge voltage category
IV
Discharge current Imax (8/20µs) wire-PE
50 kA
Discharge current In (8/20µs) wire-PE
20 kA
Energy coordination (≤10 m)
Type I, Type II, Type III
Follow-on current extinguishing capability Ifi
Not available due for technical reasons
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG
Leakage current at Un
100 µA
Lightning test current Iimp (10/350 µs) (L-PE)
12.5 kA
Low voltage network
Single-phase
Mains voltage
240 V
Max. continuous voltage, Uc (AC)
400 V
Number of poles
1
Protection level Up at IN (L/N-PE)
≤ 1.8 kV
Rated voltage (AC)
400 V
Requirements category acc. to IEC 61643-11
Type I, Type II
Requirements class, acc. to EN 61643-11
T1, T2
Response time
≤ 25 ns
Short-circuit current rating ISCCR
25 kA
Signalling contact
No
Standards
IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV
620 V
Voltage type
AC
Stripping length
15 mm
Type of connection
Screw connection
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2.5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection cross-section, stranded, max.
50 mm²
ETIM 6.0
EC000941
ETIM 7.0
EC000941
ETIM 8.0
EC000941
ETIM 9.0
EC000941
ECLASS 9.0
27-13-08-05
ECLASS 9.1
27-13-08-05
ECLASS 10.0
27-13-08-05
ECLASS 11.0
27-13-08-05
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Long specification
Class I arrestor made from V0 material for LPL III/IV with 12.5 kA, suitable for 400/690 V single-phase mains systems, tested in accordance with IEC61643-11, EN61643-11:2013. Protection level < 1.8 kV. Type: Weidmüller VPU I 1 400 V/12.5 kA Order No. 1352290000 or equivalent
Short specification
Class I arrester for LPL III/IV with 12.5 kA suitable for 400/690 V single-phase mains systems. Protection level < 1.8 kV. Type: Weidmüller VPU I 1 400 V/12.5 kA Order no. 1352290000 or equivalent
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.