Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Isolating amplifier and measuring transducer
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
CUBESERIES
D-SERIES
RIDERSERIES
MCZ-SERIES
TERMOPTO
Products
RS
General ordering data
Version
RS-SERIES, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 48 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No
Order No.
1101811001
Type
RS 30 48VDC LD LP 1A
GTIN (EAN)
4032248045891
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2022-11-25
Alternative product
2773870000
Dimensions and weights
Depth
56 mm
Depth (inches)
2.205 inch
Height
70 mm
Height (inches)
2.756 inch
Width
11.2 mm
Width (inches)
0.441 inch
Net weight
29.9 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
3820ceea-2b49-4a61-bda5-08f3867b3419
Control side
Rated control voltage
48 V DC ±10 %
Rated current DC
8 mA
Power rating
0.45 W
Status indicator
Green LED
Protective circuit
Free-wheeling diode, Reverse polarity protection
Load side
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
2000 VA
Switch-on delay
≤ 12 ms
Switch-off delay
≤11ms
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 5x105 switching cycles
Mechanical service life
20 x 106 switching cycles
Min. switching power
250 mW
General data
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Insulation coordination
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Impulse withstand voltage
4 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
RS-SERIES, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 48 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No
Order No.
1101811001
Type
RS 30 48VDC LD LP 1A
GTIN (EAN)
4032248045891
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2022-11-25
Alternative product
2773870000
Depth
56 mm
Depth (inches)
2.205 inch
Height
70 mm
Height (inches)
2.756 inch
Width
11.2 mm
Width (inches)
0.441 inch
Net weight
29.9 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
3820ceea-2b49-4a61-bda5-08f3867b3419
Rated control voltage
48 V DC ±10 %
Rated current DC
8 mA
Power rating
0.45 W
Status indicator
Green LED
Protective circuit
Free-wheeling diode, Reverse polarity protection
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
2000 VA
Switch-on delay
≤ 12 ms
Switch-off delay
≤11ms
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 5x105 switching cycles
Mechanical service life
20 x 106 switching cycles
Min. switching power
250 mW
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Impulse withstand voltage
4 kV
Protection degree
IP20
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
