Зажимной хомут (сборная шина), Винтовое соединение, серебряный, 16 mm², Ширина: 10 mm, M 4, Сталь
Заказ №
0316600000
Тип
ZB 16 ZKSC
GTIN (EAN)
4008190145989
Кол.
50 Шт.
Размеры и массы
Глубина
24 мм
Глубина (дюймов)
0,945 inch
Высота
16 мм
Высота (в дюймах)
0,63 inch
Ширина
10 мм
Ширина (в дюймах)
0,394 inch
Масса нетто
7,52 g
Экологическое соответствие изделия
REACH SVHC
/
Состояние соответствия RoHS
Соответствует без исключения
Расчетные данные согласно CSA
Поперечное сечение провода, макс. (CSA)
6 AWG
Поперечное сечение провода, мин. (CSA)
12 AWG
Сертификат № (CSA)
12400-237
Номинальные характеристики IECEx/ATEX
Сертификат № (IECEX)
IECEXULD13.0005U
Поперечное сечение провода, макс. (IECEX)
16 mm²
Указание по технике безопасности
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.