Zugbügel (Sammelschiene), Zugbügel, silber, Breite: 10 mm, M 4, Stahl
Best.-Nr.
0316600000
Art
ZB 16 ZKSC
GTIN (EAN)
4008190145989
VPE
50 Stück
Abmessungen und Gewichte
Tiefe
24 mm
Tiefe (inch)
0,945 inch
Höhe
16 mm
Höhe (inch)
0,63 inch
Breite
10 mm
Breite (inch)
0,394 inch
Nettogewicht
7,52 g
Umweltanforderungen
REACH SVHC
/
RoHS-Konformitätsstatus
Konform ohne Ausnahme
Allgemeines
Einbauhinweis
Durchführung
Bemessungsdaten IECEx/ATEX
Zertifikat-Nr. (IECEX)
IECEXULD13.0005U
Leiterquerschnitt max (IECEX)
16 mm²
Sicherheitshinweis
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.