Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2 tier
4 mm²
General ordering data
Version
Feed-through terminal block, Flat-blade connection, beige / yellow, 2.5 mm², 20 A, 400 V, Number of connections: 4, Number of levels: 2, TS 35, V-2, PA 66, 100 °C
Order No.
0217160000
Type
DK 4SS/35 FF 4X6.3/2.8
GTIN (EAN)
4008190158248
Qty.
25 pc(s).
Delivery status
Discontinued
Available until
2021-03-05
Alternative product
1021700000
Dimensions and weights
Depth
60.5 mm
Depth (inches)
2.382 inch
Height
54 mm
Height (inches)
2.126 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
9.07 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
System specifications
Version
With cable lug connection F2.8, With cable lug connection F6.3, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
2
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Clamped
CSA rating data
Certificate No. (CSA)
12400-130
Current size C (CSA)
10 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
22 AWG
Conductors for clamping (rated connection)
Clamping range, max.
2.5 mm²
Clamping range, min.
0.5 mm²
Connection direction
Inclined / angled
Number of connections
4
Type of connection
Flat-blade connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
General
Installation advice
Busbar
Rail
TS 35
Standards
IEC 61210, In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 22
Other connections
Cable-lug connection
Slotted
Rated cross-section spade connector 2.8 mm
1 mm²
Rated cross-section spade connector 6.3 mm
2.5 mm²
Rating data
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
20 A
Current at maximum wires
20 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
300 V
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
User Documentation
Catalogues
Catalogues in PDF-format
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Version
Feed-through terminal block, Flat-blade connection, beige / yellow, 2.5 mm², 20 A, 400 V, Number of connections: 4, Number of levels: 2, TS 35, V-2, PA 66, 100 °C
Order No.
0217160000
Type
DK 4SS/35 FF 4X6.3/2.8
GTIN (EAN)
4008190158248
Qty.
25 pc(s).
Delivery status
Discontinued
Available until
2021-03-05
Alternative product
1021700000
Depth
60.5 mm
Depth (inches)
2.382 inch
Height
54 mm
Height (inches)
2.126 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
9.07 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Version
With cable lug connection F2.8, With cable lug connection F6.3, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
2
Number of levels
2
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Clamped
Certificate No. (CSA)
12400-130
Current size C (CSA)
10 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
22 AWG
Clamping range, max.
2.5 mm²
Clamping range, min.
0.5 mm²
Connection direction
Inclined / angled
Number of connections
4
Type of connection
Flat-blade connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 22
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Installation advice
Busbar
Rail
TS 35
Standards
IEC 61210, In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 22
Cable-lug connection
Slotted
Rated cross-section spade connector 2.8 mm
1 mm²
Rated cross-section spade connector 6.3 mm
2.5 mm²
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
20 A
Current at maximum wires
20 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
300 V
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
