Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2-tier
10 mm²
16 mm²
1 1/4"x1/4" fuse
5x20 fuse
5x25 fuse
5x30 fuse
E 14 fuse
General ordering data
Version
Fuse terminal, Screw connection, medium yellow, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, 10 x 38 mm
Order No.
0178220000
Type
SAKS 4/35 USA
GTIN (EAN)
4008190095987
Qty.
20 pc(s).
Dimensions and weights
Depth
65 mm
Depth (inches)
2.559 inch
Depth including DIN rail
66 mm
Height
75 mm
Height (inches)
2.953 inch
Width
24 mm
Width (inches)
0.945 inch
Net weight
79.35 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
KrG
Colour
medium yellow
UL 94 flammability rating
V-0, 5VA
System specifications
Version
Screw connection, Fuse cartridge, for screwable cross-connection, One end without connector
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
12400-188
Current size B (CSA)
30 A
Current size C (CSA)
30 A
Current size D (CSA)
5 A
Voltage size B (CSA)
600 V
Voltage size C (CSA)
600 V
Voltage size D (CSA)
600 V
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
22 AWG
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
10 mm²
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
1.0 x 5.5 mm
Clamping range, max.
16 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 4
Connection cross-section, stranded, max.
10 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
14 mm
Tightening torque, max.
2.4 Nm
Tightening torque, min.
1.2 Nm
Torque level with DMS electric screwdriver
4
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
10 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Display element
Type of voltage for indicator
AC/DC
Fuse terminals
Cartridge fuse
10 x 38 mm
Display
Without LED
Fuse holder (cartridge holder)
for screw fixing
Operating voltage, max.
400 V
Type of voltage for indicator
AC/DC
General
Installation advice
Direct mounting
Rail
TS 35
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Rating data
Rated cross-section
10 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
16 A
Current at maximum wires
30 A
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.82 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
30 A
Voltage size C (UR)
600 V
Important note
Product information
The voltage depends on the selected fuse element or the selected indicator light
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Order No.:
0501820000
Type:
SAKS 4/35
Version:
Fuse terminal, Screw connection, medium yellow, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, E14
Order No.:
0501800000
Type:
SAKS 4/35 DB
Version:
Fuse terminal, Screw connection, dark beige, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, E14
Version
Fuse terminal, Screw connection, medium yellow, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, 10 x 38 mm
Order No.
0178220000
Type
SAKS 4/35 USA
GTIN (EAN)
4008190095987
Qty.
20 pc(s).
Depth
65 mm
Depth (inches)
2.559 inch
Depth including DIN rail
66 mm
Height
75 mm
Height (inches)
2.953 inch
Width
24 mm
Width (inches)
0.945 inch
Net weight
79.35 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
KrG
Colour
medium yellow
UL 94 flammability rating
V-0, 5VA
Version
Screw connection, Fuse cartridge, for screwable cross-connection, One end without connector
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
Certificate No. (CSA)
12400-188
Current size B (CSA)
30 A
Current size C (CSA)
30 A
Current size D (CSA)
5 A
Voltage size B (CSA)
600 V
Voltage size C (CSA)
600 V
Voltage size D (CSA)
600 V
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
22 AWG
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
10 mm²
Connection type, additional connection
Screw connection
Blade size
1.0 x 5.5 mm
Clamping range, max.
16 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 4
Connection cross-section, stranded, max.
10 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
14 mm
Tightening torque, max.
2.4 Nm
Tightening torque, min.
1.2 Nm
Torque level with DMS electric screwdriver
4
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
10 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Type of voltage for indicator
AC/DC
Cartridge fuse
10 x 38 mm
Display
Without LED
Fuse holder (cartridge holder)
for screw fixing
Operating voltage, max.
400 V
Type of voltage for indicator
AC/DC
Installation advice
Direct mounting
Rail
TS 35
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Rated cross-section
10 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
16 A
Current at maximum wires
30 A
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.82 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
30 A
Voltage size C (UR)
600 V
Product information
The voltage depends on the selected fuse element or the selected indicator light
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
0501820000
Type:
SAKS 4/35
Version:
Fuse terminal, Screw connection, medium yellow, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, E14
Order No.:
0501800000
Type:
SAKS 4/35 DB
Version:
Fuse terminal, Screw connection, dark beige, 10 mm², 16 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, 5VA, KrG, E14
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}